I hear, I forget - I see, I remember - I do, I understand
20 Sept 2009
Change ip of jetdirect 170x - howto, no comments:, post a comment.
Note: only a member of this blog may post a comment.
Total Pageviews
Select registration option
Personal accounts.
- Save your personal devices and preferences
- Easy access to support resources
Business/IT accounts
- Managing contracts and warranties for your business
- Submitting and managing support cases
hp-support-head-portlet
Hp-contact-secondary-navigation-portlet, select your model, let hp find my products.
HP can identify most HP products and recommend possible solutions.
hp-share-print-widget-portlet
Check the information on compatibility, upgrade, and available fixes from HP and Microsoft. Windows 11 Support Center
hp-concentra-wrapper-portlet
Hp jetdirect and embedded jetdirect inside print servers - how to determine, reset, and configure an ip address on an hp jetdirect print server, introduction.
- How to determine the current TCP/IP address of the HP Jetdirect
- If necessary, how to reset the HP Jetdirect to factory default settings
- Which method to use to configure the TCP/IP address on the HP Jetdirect
Printing a Configuration page to determine the TCP/IP address of the HP Jetdirect
Resetting the hp jetdirect to factory default settings.
- Most HP printers with internal HP Jetdirect print servers can be reset to factory defaults (or cold-reset) by turning the printer off and holding down the ONLINE or GO buttons while turning the printer back on. The printer's control panel display should read Cold Reset or Restoring Factory Settings . If the printer has no LCD display, the indicator lights will cycle.
- To cold reset an LIO print server (such as the 250M or 200M), remove the print server from the printer, press an hold the test button while putting the print server back into the printer. Continue to hold the test button for about five seconds.
- To cold reset an HP Jetdirect external print server, unplug the power cord from the HP Jetdirect print server, then hold down the TEST button (on top of or in back of the HP Jetdirect) for five to 30 seconds while plugging in the power cord.
Methods to configure the TCP/IP address of the HP Jetdirect
- Using the control panel of a printer or plotter
- Using a Web browser to use the HP Jetdirect print server's embedded Web server
- Using Telnet from a computer
- HP Web Jetadmin
note: The following Embedded Print Servers are not supported in a UNIX or Novell environment: Printer Embedded Print Server Model HP Color LaserJet 3000dn Q7535A HP Color LaserJet 3000n Q7534A HP Color LaserJet 3600dn Q5988A HP Color LaserJet 3600n Q5987A HP Color LaserJet 3800dn Q5983A HP Color LaserJet 3800dtn Q5984A HP Color LaserJet 3800n Q5982A
- Using a BootP or DHCP server
- Using Arp -s and Ping from a computer
Using the front panel of printer
Using the hp jetdirect embedded web server.
- Using a supported Web browser, enter the IP address of the HP Jetdirect print server as you would a URL.
- The HP Jetdirect main Web page will be displayed. Click Networking , Network Settings , and then TCP/IP or click Administration and then Configuration . From this page, it is possible to modify the TCP/IP addresses and the set community name.
Using Telnet
Before using telnet.
note: See the help files or man pages of the operating system for more ways to use route add (for example, how to add the subnet and hop count).
- After the route add command, it should be possible to Telnet to 192.0.0.192. In the Telnet session, follow these directions:
- At a DOS or command prompt type telnet 192.0.0.192 . In Windows 2000, type telnet , then, press Enter Type SET LOCAL_ECHO Type open ipaddress (for example: open 198.164.222.222 )
- Press ENTER twice.
- Type a question mark (?) to display a list of the available commands used for configuring the HP Jetdirect print server. Type a forward slash (/) to see the current settings on the print server. Print servers with firmware before x.05.05 only need a question mark (?) to display a list of commands and the current settings.
- Using the list of commands displayed, make the desired changes.
- Type quit to exit and save changes (type exit to exit Telnet without saving changes).
HP Web Jetadmin 7.x
- Open HP Web Jetadmin 7.x
- If the TCP/IP address is already configured on the HP Jetdirect print server and needs to be changed, enter the TCP/IP address in Quick Device Find, and click GO . Skip to Step 6. For new HP Jetdirect print servers that have not been configured with a TCP/IP address, proceed to Step 3.
- From the left side Navigation menu, select Device Management .
- Expand the Device Management folder.
- Expand the Device Lists folder.
- Highlight New Devices .
- Click the column header of your choice, such as IP Address or Device Model . Arrange the list by ascending or descending order.
- Highlight the printer to be configured.
- From the Device Tools drop-down menu, select Open Device .
- From the drop-down menu at the top, select Configuration .
- Under Configuration Categories located on the top left side, Click Network .
- Enter the IP information. You may scroll down for more options.
- Click Apply to save the settings.
- Click the Refresh icon located on the top right of the screen.
- Print a Configuration page from the printer's front panel.
- Select Status from the drop-down menu.
- Select Diagnostics from the drop-down menu.
Using HP Jetdirect Printer Installer for UNIX
- Login as root, and run hppi (found in the /opt/hpnpl directory).
- Select Jetdirect Configuration (super-user only).
- Select Create Printer Configuration in BOOTP/TFTP database.
- The software will prompt for the HP Jetdirect LAN hardware address (This can be found on the configuration page of the printer or the external HP Jetdirect).
- Follow the steps on screen to assign a hostname and a TCP/IP address for the HP Jetdirect print server. The TCP/IP address must be correct for the network.
- Configure the remainder of the optional parameters as necessary. Typically, the important ones to note are Subnet mask, Gateway, and Banner Page.
- Type a zero to configure the BOOTP/TFTP entry.
- Turn on the HP Jetdirect print server (or turn it off and back on) or cold reset the printer/Jetdirect. When the HP Jetdirect boots up, it will broadcast BootP requests and receive the TCP/IP address form the BootP server.
- Select Jetdirect Configuration (super-user only)
- Select Set IP Address locally . Use this for unconfigured HP Jetdirect print servers.
- Select Open Telnet Session to Jetdirect Card . Use this for HP Jetdirect print servers that are already configured.
- If Option 4 is selected, enter the HP Jetdirect LAN hardware address. This can be found on the configuration page of the printer or the external HP Jetdirect. If Option 5 is selected, enter the hostname or IP address of the HP Jetdirect print server.
- Follow the steps on screen to enter the TCP/IP address, and finish the configuration.
Bootstrap Protocol (BootP)
Dynamic host configuration protocol (dhcp), arp -s tcp/ip configuration.
note: HP Jetdirect cards will not accept an ARP -s configuration over routers. When a router routes a packet, the destination MAC address is the MAC address of the router and not the address of the HP Jetdirect. As a result, the HP Jetdirect will never receive the ICMP echo request packet unless it is on the same segment as the client workstation that is attempting to configure it.
- Example 1 (for Microsoft Windows): ARP -s 10.1.2.3 08-00-09-12-34-56 ping 10.1.2.3
- Example 2 (for UNIX): ARP -s 10.1.2.3 08:00:09:12:34:56 ping 10.1.2.3 apr -d 10.1.2.3
note: HP recommends that the static arp table entry be removed after the HP Jetdirect obtains the TCP/IP address information. Deleting the static arp table entry can be done by typing arp -d ip_address_used_in_arp -s
hp-feedback-input-portlet
Hp-feedback-banner-portlet, hp-country-locator-portlet, select a location.
After you choose your location, you'll be able to select a language
Europe, Middle East, Africa
Asia pacific and oceania, select a language, hp-detect-load-my-device-portlet, hp-hero-support-search.
- All Support
- Software, Drivers and Updates
- Troubleshooting
- Product Information
- User Guides
Search help
Tips for better search results.
- Ensure correct spelling and spacing - Examples: "paper jam"
- Use product model name: - Examples: laserjet pro p1102, DeskJet 2130
- For HP products a product number. - Examples: LG534UA
- For Samsung Print products, enter the M/C or Model Code found on the product label. - Examples: “SL-M2020W/XAA”
- No Translation available
Need help finding your product name or product number?
Finding your Serial Number Finding your Product Number
Session timed out
Please sign back in to continue
- Site Search Search Posts Find A Forum Thread Number Threads by Name Search FAQs
- ENGINEERING.com
- Eng-Tips Forums
- Tek-Tips Forums
Join Tek-Tips ® Today!
Join your peers on the Internet's largest technical computer professional community. It's easy to join and it's free.
Here's Why Members Love Tek-Tips Forums:
- Notification Of Responses To Questions
- Favorite Forums One Click Access
- Keyword Search Of All Posts, And More...
Register now while it's still free!
Already a member? Close this window and log in.
Join Us Close
How to control your HP Jetdirect 170x
Background tspan { white-space:pre } .shp0 { fill: #ffffff } .shp1 { opacity: 0.749;fill: #ffffff } .shp2 { opacity: 0.251;fill: #ffffff } .shp3 { opacity: 0.502;fill: #ffffff }
Configuring an HP Jetdirect Via Telnet
By Paul Anderson / 6 years ago — File/Print
If you ever need to reconfigure an HP Jetdirect, this can be done via telnet. We have a model 170x; however, this procedure will work with many Jetdirect boxes. First off, you need to figure out the current IP address. Do this by pushing the system test button on the Jetdirect box. The current IP address and subnet mask will be listed. Once you have the IP address, bind another address on the same network as the Jetdirect box, and telnet to it:
Let’s change the IP address, subnet mask, and default gateway:
Type quit to save the changes:
Test the new configuration:
All good. Note that the password can be changed, but there currently is no password. This may be OK for an internal network, but to be safe, consider changing this so that a password is required.
Paul is an Avid Tech Geek who Loves writing, Cycling and All Things Linux! He comes from a Background of Windows Administration along with Ubuntu/Centos Server administration. Paul holds industry wide certifications include CompTIA & Microsoft Accredited certifications.
Information
- Privacy Policy
- Terms of Use
- Staff/Authors
- TechRepublic
TechRepublic | Forums | Desktop
- Register Now or LOG IN to post
- Recent Activity
General discussion
- Creator Topic
HP jetdirect 170X
by mnghishekwa · about 19 years, 1 month ago
I have HP jetdirect 170X series without it original CD.
I would like to use to connect hp lj1100 printer.
Does anybody know to configure this. Downloaded Jet Web Admin. Does not find it. followed steps from HP web site. Does not help.
All Comments
- Author Replies
Reply To: HP jetdirect 170X
by jennifer.gardner · about 19 years, 1 month ago
In reply to HP jetdirect 170X
Did you check the HP website first to see if the 170x print server is compatible with the LJ 1100? It won’t work with all HP printers.
I haven’t done that yet? One question! when yoou press test on the device it print out the spects together with the default ip address of the jetdirect. Is that not an indication I only need to configure the jetdirect to the IP address?
by chris910 · about 19 years, 1 month ago
If you have the 170X with the b revision it will work with this printer. JxxxxB the A revision has certain issues but may work depending on your network setup.
–You will need a crossover network cable or a hub and two patch cords to connect a computer directly to the print server. –Connect the printer to the print server and then to the computer that you are going to use to configure the print server. (It’s best if you are not on the network yet depending on your configuration) –Temporarily change the computers IP address to 192.0.0.1. –Now reset the Print server to it’s default values. While holding down the test button Apply power to the print server. Then you can release it. Wait at least 2 min. for the print server to complete it’s initial configuration.
–At this point there are three options: —Use 192.0.0.192 as the url in your browser, then configure the settings using this interface. (remember, Change the TCP/IP settings after all other changes have been applied.)(this is the simplest for configuring the print server but is subject to browser settings.) —Create a connection using hyperterminal. 192.0.0.19, port 23, TCP/IP (winsock), and under settings-ASCII setup-check echo typed charactors locally. Follow directions at the prompt. Help displays all of the commands. remember that most commands are lower case and the settings are uppercase. (IE. host-name:THENAME) —Telnet 192.0.0.192 from a command prompt. ( the charactors you type will not be displayed as you type them but will be sent to the print server when you hit enter. Use the / to verify the changes you have made. (this is the simplest to setup but the least friendly to use)
-Now that the changes have been made you should be able to plug the print server into your network with no problems. To verify your settings tap the test button on the print server and it will print a test/configuration page to the printer.
IT training policy
Successful IT departments are defined not only by the technology they deploy and manage, but by the skills and capabilities of their people. IT workers must keep up to date with the latest technology trends and evolutions, as well as developing soft skills like project management, presentation and persuasion, and general management. Due to the ...
MSP best practices: Network switch and router maintenance checklist
Managed services providers often prioritize properly configuring and implementing client network switches and firewalls. However, regularly reviewing and updating such components is an equally important responsibility. It’s essential to ensure clients understand the necessity of regularly auditing, updating and creating new backups for network switches and routers as well as the need for scheduling the ...
Service level agreement policy
A service level agreement is a proven method for establishing expectations for arrangements between a service provider and a customer. SLAs involve identifying standards for availability and uptime, problem response/resolution times, service quality, performance metrics and other operational concepts. SLAs streamline operations and allow both parties to identify a proper framework for ensuring business efficiency ...
- TechRepublic on Twitter
- TechRepublic on Facebook
- TechRepublic on LinkedIn
- TechRepublic on Flipboard
- Privacy Policy
- Terms of Use
- Property of TechnologyAdvice
- Reservations
- Upcoming Events
- South louisiana serial killer victims
- Wnep school closings for tomorrow
- Mac os mountain lion iso free download
- Minecraft java hacked client 1-16
- How to convert ost to pst in outlook 365
- Horizon xbox 360 download
- Max payne 3 game save
- Cities skylines traffic lights
- Movie melody 1971
- Telnet commands to change ip of hp jetdirect 170x
- Voitures cars 2 disney
- Antares mic mod efx kickass
- Tech tool pro volume rebuild not availalbe
- Bronica rf645 service manual
#Telnet commands to change ip of hp jetdirect 170x manual#
We have a model 170x, however, this procedure will work with many Jetdirect boxes. To configure the Jetdirect must be used to read. If you ever need to reconfigure an HP Jetdirect, this can be done via telnet. Do this by pushing the system test button on the Jetdirect box. To configure the Jetdirect print servers. Very often I've found that early 600 series JetDirect cards will become unresponsive to the network. Through one reliable network using an EIO card that use unshielded. HP JetDirect print servers are designed to help meet the needs of a broad base of networked environments. Internal print servers for Ethernet 10Base-T providing the simplest way to share an HP EIO printer on a network. The card must first be installed into the printer and connected to the network. I used to use download manager to upgrade jet direct cards. Default IP address IPv4 When in a factory-default state, the HP Jetdirect print server has no IP address. The HP JetDirect print server to the best online. The computer with the proper BootP configuration sends the TCP/IP information to the HP Jetdirect print server. With an HP Jetdirect print server, you can connect and share your printer anywhere on your network and print at network speeds.
View and Download HP JetDirect 600N instruction manual online. HP Jetdirect 600n Jetdirect print at eBay! In addition, a network connection allows data transfers to or from the device at network speeds. We have emailed you a verification link to to complete your registration.
- Attack on yaoi flash game
- Eminem recovery album theory
- Guitar pro 7-5 speed trainer
- Dragon ball xenoverse cheat table
- Mathematica 11-2 now available
- Body sketch
- Shoretel communicator app
- Windows loader unsupported partition table
- Pivot code 20xx melee
- Ea sports ufc 3 face
- Safe communities act s 1305
- Versapro rotary multitaske
- Gun mayhem 3
Telnet commands to change ip of hp jetdirect 170x
#telnet commands to change ip of hp jetdirect 170x how to.
If nothing else, this article may get you thinking in the right direction. A guide from HP is linked at the bottom of this article for your convenience.
If you want more advice on how to lock down your network printer visit your vendors web site. However I feel this information will be useful to system administrators and auditors so that they know what sorts of things to look out for when it comes to network printers. Some of this article may seem a little Black-hat as it concentrates more on the breaking-in than the keeping-out. This article will attempt to point out some of the more interesting things that can be done with a network based printer to make it reveal information about its users, owners and the network it's part of. In the olden days a printer may not have been much of a concern other than the threat from folks dumpster diving for hard copies of the documents that were printed from it, but many modern printers come network aware with embedded Operating Systems, storage and full IP stacks. Hacking etwork Printers(Mostly HP JetDirects, but a little info on the Ricoh Savins)By Adrian "Irongeek" Crenshaw Hack a printer you say, what kind of toner have you been smoking, Irongeek? Well, I'm here to tell you, there's more that can be done with a printer to compromise network security than one might realize. Hacking Network Printers (Mostly HP JetDirects, but a little info on the.
Connect to and configure HP Jetdirect 170x Print Server
© 1996- 2023 Experts Exchange, LLC. All rights reserved. Covered by US Patent
- Print Server
- 175X - JetDirect Print Server
- Administrator's manual
HP jetdirect 175x Administrator's Manual
- User manual (142 pages)
- Administrator's manual (302 pages)
- Manuallines (33 pages)
- page of 303 Go / 303
Table of Contents
Troubleshooting.
Advertisement
Quick Links
1 introducing the hp jetdirect print server.
- Introduction
- Supported Print Servers
- Supported Products
- Supported Network Protocols
- SNMP (IP and IPX)
- Authentication (Wireless Print Servers)
- Server-Based Authentication
- Without an Authentication Server
- Supplied Manuals
- Firmware Installation Tools
- HP Support by Phone
- Product Registration
2 HP Software Solutions Summary
- Software Solutions
- HP Jetdirect Wireless Setup Wizard
- HP Install Network Printer Wizard (Windows)
- HP Jetdirect Printer Installer for UNIX
- System Requirements
- Installing HP Web Jetadmin
- Verifying Installation and Providing Access
- Configuring and Modifying a Device
- Removing HP Web Jetadmin Software
- Features and Benefits Provided by Internet Printing Include
- HP-Supplied Software
- HP Software Supported Proxies
- HP Software System Requirements
- Microsoft Supplied Software
- Windows 2000/XP Integrated Software
- Novell Supplied Software
- Windows Me IPP Client
- HP IP/IPX Printer Gateway for NDPS
- To Get the Software
- HP WPS Assistant (Mac os X)
- Installing the Printer Software
- Configuring the Printer
- Running the HP Laserjet Utility
- Verifying Network Configuration
- Renaming the Printer
- Selecting a Zone
- Selecting Your Printer
- Testing the Configuration
3 TCP/IP Configuration
- Default IP Address will Not be Assigned
- Default IP Address will be Assigned
- Default IP Address Configuration Options
- Default IP Parameter
- DHCP Requests Enable/Disable
- Default IP on Wireless and Wired Print Servers
- TCP/IP Configuration Tools
- Using Software
- Arp and Ping Commands
- Embedded Web Server
- Why Use BOOTP/TFTP?
- BOOTP/TFTP on UNIX
- Systems that Use Network Information Service (NIS)
- Configuring the BOOTP Server
- Bootptab File Entries
- Tags Supported in a BOOTP/DHCP Boot File
- TFTP Configuration File Entries
- List of Supported TFTP Parameters
- TFTP Configuration File Parameters
- UNIX Systems
- Windows Systems
- Windows NT 4.0 Server
- Windows 2000 Server
- Netware Systems
- To Discontinue DHCP Configuration
- Using the Arp and Ping Commands
- Creating a Telnet Connection
- A Typical Telnet Session
- Command Line Interface (Default)
- Telnet Commands and Parameters
- Menu Interface
- Example: Using the Menu Interface
- Using Telnet to Erase the Existing IP Settings
- Using the Embedded Web Server
- Using the Printer Control Panel
- Moving to Another Network
4 Using the Embedded Web Server
- Typical HP Jetdirect Home Tab
- HP Jetdirect Networking Tab
- Compatible Web Browsers
- Browser Exceptions
- Supported HP Web Jetadmin Version
- Entering the IP Address
- Operating Notes
- HP Jetdirect Home Tab
- HP Jetdirect Home Page Items
- Networking Menu Items
- Sending Product Information to HP
- Network Settings
- 802.11B (Wireless Ethernet)
- 802.11B Configuration Parameters
- TCP/IP Settings
- IPX/SPX Settings
- Appletalk Settings
- SNMP Settings
- Other Settings
- Misc. Settings
- Firmware Upgrade
- LPD Queue Parameters
- USB Settings
- Support Info
- Refresh Rate
- Privacy Settings
- Select Language
- Restore Defaults
- Wizard Security Levels
- Authorization
- Admin. Account
- Printer Password Synchronization
- Certificates
- Jetdirect Certificate
- Configuring Certificates
- Certificate Configuration Screens
- Access Control
- Mgmt. Protocols
- Protocol Info
- Configuration Page
- Other Links
5 Configuring for LPD Printing
- LPD Programs and Protocols
- Requirements for Configuring LPD
- Setting up IP Parameters
- Setting up Print Queues
- Printing a Test File
- Supported Queue Names
- Configuring Print Queues for BSD-Based Systems
- Example: Printcap Entries for ASCII or Text Printers
- Configuring Print Queues Using SAM (HP-UX Systems)
- Installing TCP/IP Software (Windows NT)
- Configuring a Network Printer for Windows NT 4.0 Systems
- Verifying the Configuration
- Adding Windows Optional Networking Components
- Configuring a Network LPD Printer
- Adding a New LPD Printer
- Creating an LPR Port for an Installed Printer
- Assigning an IP Address
- Setting up Mac os
6 FTP Printing
- Requirements
- Print Files
- FTP Connections
- Control Connection
- Data Connection
- FTP Login Example
- Ending the FTP Session
- User Commands for HP Jetdirect FTP Server
- Example of an FTP Session
7 Security Features
- Summary of HP Jetdirect Security Features
- Secure Embedded Web Server Management
- Network Protocol Control
- IP Administrator Password
- IP Access Control List
- Telnet Control
- Authentication and Encryption
- SNMP V1/V2C Set Community Name (IP/IPX)
- HP Web Jetadmin Password and Profiles
- Printer Control Panel Lock
- Using Security Features
- Settings for Access Control
8 Troubleshooting the HP Jetdirect Print Server
- HP Laserjet Printer with Internal EIO Print Server
- HP Jetdirect Internal LIO Print Servers
- HP Jetdirect External Print Servers
- Troubleshooting Chart - Assessing the Problem
- Verifying that the Printer Is on and Online
- Printing an HP Jetdirect Configuration Page
- Resolving Printer Display Error Messages
- Resolving Printer Communication Problems with the Network
- Unable to Communicate During Initial Setup
- Unable to Communicate after Initial Setup
- My Configured Channel Does Not Match the Configuration Page
- Unable to Use the HP Jetdirect Wireless Setup Wizard
- Improving Reception and Performance
- Corrective Actions
- Firmware Download Failure
- If Server-Based Authentication Is Not Used
- If Server-Based Authentication Is Used
- Troubleshooting an LPD UNIX Configuration
9 HP Jetdirect Configuration Page
- Status Field Error Messages
- Typical Jetdirect Configuration Page
- Configuration Page Messages
- HP Jetdirect Configuration/General Information
- USB Printer Settings
- 802.11B Wireless Settings
- Security Settings
- Network Statistics
- TCP/IP Protocol Information
- IPX/SPX Protocol Information
- Novell Netware Parameters
- Appletalk Protocol Information
- DLC/LLC Protocol Information
- Token Ring Diagnostics
- Error Messages
TCP/IP Overview
- Internet Protocol (IP)
- Transmission Control Protocol (TCP)
- User Datagram Protocol (UDP)
- IP Address: (Host Portion)
- IP Address: (Network Portion)
- IP Address Class Format
- IP Address Structure and Class
- Network Class Characteristics
- Dynamic Host Configuration Protocol (DHCP)
- Subnet Mask
- Default Gateway
- Syslog Server
- HP Jetdirect Syslog Parameters
HP Jetdirect 802.11B Wireless Print Servers
- WLAN Communication Mode Topologies
- Infrastructure Mode
- Infrastructure Mode Examples
- Ad Hoc (Peer-To-Peer) Mode
- Network Access and Data Security
- Network Name (SSID)
- Authentication
- Open System
- Eap/802.1X. IEEE 802.1X EAP
- Dynamic Encryption
- Connect the Print Server Hardware to the Printer
- Configure a Wireless Connection to Your Network
- Before You Begin
- To Set up Your Wireless Computer for Jetdirect Communications
- To Configure the Jetdirect Print Server for Your Network
- Using the HP Jetdirect Wireless Setup Wizard (Windows).
- HP WPS Assistant (Mac os X 10.1.5 or Later)
- Using Your Web Browser (Windows and Mac OS)
The HP Jetdirect Control Panel Menu
- Classic Control Panel
- HP Jetdirect Classic Control Panel Menu
- Graphical Control Panel
- HP Jetdirect Graphical Control Panel Menu
- Troubleshooting the HP Jetdirect Print Server 188
- General Troubleshooting 191
- Troubleshooting Wireless Print Servers 199
- Troubleshooting an LPD UNIX Configuration 205
Related Manuals for HP jetdirect 175x
Summary of Contents for HP jetdirect 175x
- Page 1 175x 310x 380x en3700 200m 250m 280m 610n 615n 620n 680n hp jetdirect administrator's guide...
- Page 2 Administrator’s Guide HP Jetdirect Print Servers Models: en3700 175x 200m 310x 250m 380x 280m 610n 615n 620n 680n...
- Page 3 The information contained in this document is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
Page 4: Table Of Contents
Page 5: table of contents, page 6: table of contents, page 7: introduction, page 8: supported print servers, page 9: supported network protocols.
- Page 10 DLC/LLC Microsoft Windows NT** Artisoft LANtastic** * Refer to the current HP Jetdirect product data sheets for additional network systems and versions. For operation with other network environments, consult your system vendor or authorized HP dealer. ** For these network systems, contact your network system vendor for software, documentation, and support.
Page 11: Security Protocols
- Page 12 Authentication (Wireless Print Servers) Server-Based Authentication HP Jetdirect 802.11b wireless print servers support popular authentication server-based methods for network access based on IEEE 802.1x Extensible Authentication Protocol (EAP), including: LEAP (Lightweight Extensible Authentication Protocol). LEAP is a proprietary protocol from Cisco Systems, Inc. It uses passwords for mutual authentication between a client and a network authentication server.
- Page 13 Wi-Fi Protected Access (WPA) dynamic encryption protocols for wireless communications. Encryption HP Jetdirect 802.11b wireless print servers support static WEP (Wired Equivalent Privacy) encryption. For static WEP encryption, a network WEP key of fixed length (40/64-bit or 104/128-bit) is shared by each device on the network.
Page 14: Supplied Manuals
- Page 15 HP Jetdirect Download Manager (Windows). HP Jetdirect Download Manager can be downloaded from HP online support http://www.hp.com/go/dlm_sw HP Web Jetadmin may be used on supported systems. For more information on HP Web Jetadmin, visit: http://www.hp.com/go/webjetadmin/ For firmware versions x.24.00 and later, the embedded Web server resident on the print server provides a firmware upgrade feature using your Web browser.
Page 16: Product Registration
- Page 17 HP Software Solutions Summary Introduction HP provides a variety of software solutions to set up or manage your HP Jetdirect-connected network devices. See determine which software is best for you. Note For more information on these and other solutions, visit HP online support at: http://www.hp.com/support/net_printing...
- Page 18 Table 2.1 Software Solutions (2 of 3) Operating Environment HP Jetdirect Printer Installer for UNIX HP-UX 10.x-10.20, 11.x Solaris 2.6, 7, 8 (SPARCsystems only) TCP/IP HP Web Jetadmin (See the HP Website for supported system updates.) Windows NT 4.0, 2000, XP...
- Page 19 Table 2.1 Software Solutions (3 of 3) Operating Environment HP IP/IPX Printer Gateway for NDPS NetWare 5.x, 6.0 (IPX only) HP WPS Assistant (Mac OS X) Mac OS X 10.1.5 or later HP LaserJet Utilities for Mac OS Mac OS 9.x, X (Classic...
Page 20: Hp Jetdirect Wireless Setup Wizard
Page 21: hp install network printer wizard (windows), page 22: hp jetdirect printer installer for unix, page 23: hp web jetadmin.
- Page 24 By default, the port number is 8000. Provide users access to HP Web Jetadmin software by adding a link to your Web server’s home page that is addressed to HP Web Jetadmin’s URL. For example: http://systemname.domain:port/...
- Page 25 You can also substitute the systemname.domain with the TCP/IP address. Removing HP Web Jetadmin Software To remove HP Web Jetadmin software from your Web server, use the uninstall program provided with the software package. ENWW HP Software Solutions Summary 25...
Page 26: Internet Printer Connection Software
- Page 27 Windows 2000/XP IPP-client software. To set up a print path to an HP Jetdirect-connected Internet printer using the Windows 2000/XP IPP-client software, proceed as follows: 1. Open the Printers folder (click Start, select Settings, and select Printers).
- Page 28 Then click Next. 5. You will be prompted for a printer driver (the HP Jetdirect print server does not contain printer drivers, so your system cannot automatically obtain the driver). Click OK to install the printer driver onto your system and follow the instructions on the screen.
Page 29: Hp Ip/Ipx Printer Gateway For Ndps
- Page 30 To Get the Software The HP IP/IPX Printer Gateway is included with all current versions of NDPS. Novell NetWare 5.x and 6.0 includes NDPS. To obtain the most recent software version, or to obtain the related documentation: Visit http://www.hp.com/go/hpgate_sw Select and follow the instructions for downloading drivers and software.
Page 31: Hp Wps Assistant (Mac Os X)
Page 32: hp laserjet utilities for mac os.
- Page 33 Configuring the Printer The HP LaserJet Utility allows printer settings such as printer name and preferred zone to be configured from your Mac OS system. Hewlett-Packard recommends that only network administrators use the printer configuration capabilities of this utility. If this printer is to be serviced by a print spooler, set up the printer's name and zone before configuring the spooler to capture the printer.
- Page 34 “Michael’s LaserJet 4000.” The HP LaserJet Utility has the ability to rename devices located in different zones, as well as the local zone (no zones need to be present in order to use the HP LaserJet Utility). 1. Select the Settings icon from the scrolling icon list. The Please select a setting: dialog appears.
- Page 35 Chooser. Selecting a Zone The HP LaserJet Utility allows you to select a preferred zone for your printer on a Phase 2 EtherTalk network. Instead of your printer remaining on the default zone, which is set by the router, this utility lets you select the zone on which your printer appears.
- Page 36 To display your user name on the network when you are printing documents, go into the Control Panel on your Mac OS computer, select Sharing Setup, then type your owner name. ENWW for more information. HP Software Solutions Summary 36...
- Page 37 Print Desktop. The Print dialog box appears. 2. Click Print. If the printer prints the job, you have connected your printer to your network correctly. If your printer does not print, see Chapter ENWW HP Software Solutions Summary 37...
- Page 38 TCP/IP Configuration Introduction To operate properly on a TCP/IP network, the HP Jetdirect print server must be configured with valid TCP/IP network configuration parameters, such as an IP address that is valid for your network. For general information on TCP/IP networks, see...
Page 39: Default Ip Address
- Page 40 Internet will not be available. The default gateway address will be the same as the link-local address. If a duplicate address is sensed, the HP Jetdirect print server will automatically reassign its address, if necessary, in accordance with standard link-local addressing methods.
- Page 41 Telnet, a Web browser, and SNMP management applications. HP Jetdirect Wireless Print Server. When initially powered on, a factory-default wireless print server that has no connection to a network will likely self-assign a link-local IP address. If a network...
- Page 42 TCP/IP Configuration Tools Depending on your printer and operating system, an HP Jetdirect print server can be configured with valid TCP/IP parameters for your network in the following ways: Using Software. You can use your printer installation software or the HP Jetdirect print server installation software on supported systems.
- Page 43 Telnet. You can set configuration parameters using Telnet. In order to set configuration parameters, set up a Telnet connection from your system to the HP Jetdirect print server using the default IP address. Once configured, the print server saves the configuration when powered off/on. For more information, see Embedded Web server.
Page 44: Using Bootp/Tftp
- Page 45 In DHCP, IP configuration parameters are leased and may change over time. When in its factory-default state and powered on, the HP Jetdirect print server will attempt to automatically configure itself using several dynamic methods, one of which is BOOTP.
- Page 46 TFTP is used to obtain additional configuration information from a configuration file on a TFTP server. When the HP Jetdirect print server is powered on, it broadcasts a BOOTP request that contains its MAC (hardware) address. A BOOTP server daemon searches the /etc/bootptab file for a matching MAC address, and if successful, sends the corresponding configuration data to the Jetdirect print server as a BOOTP reply.
- Page 47 Bootptab File Entries An example of a /etc/bootptab file entry for an HP Jetdirect print server is provided below: picasso:\ :hn:\ :ht=ether:\ :vm=rfc1048:\ :ha=0001E6123456:\ :ip=192.168.40.39:\ :sm=255.255.255.0:\ :gw=192.168.40.1:\ :lg=192.168.40.3:\ :T144=“hpnp/picasso.cfg”: Note that the configuration data contains “tags” to identify the various HP Jetdirect parameters and their settings. Entries and tags supported by the HP Jetdirect print server (firmware version x.24.00 or later) are listed in...
- Page 48 ENWW Description The subnet mask tag. The subnet mask will be used by the HP Jetdirect print server to identify the portions of an IP address that specify the network/subnetwork number and the host address. The gateway IP address tag. This address identifies the...
- Page 49 (ef) to specify the relative path name of the TFTP configuration file. Idle Timeout option. An HP-proprietary tag to set the idle timeout (seconds), which is the amount of time that a print data connection may remain idle before being closed. The range is 1 - 3600 seconds.
- Page 50 TFTP Configuration File Entries To provide additional configuration parameters for your HP Jetdirect print server, such as SNMP (Simple Network Management Protocol) or non-default settings, an additional configuration file can be downloaded using TFTP. This TFTP configuration file’s relative path name is specified in the BOOTP reply using the /etc/bootptab file’s T144 vendor-specific tag...
- Page 51 # Example of an HP Jetdirect TFTP Configuration File 192.168.10 # Allow only Subnet access to peripheral. # Up to 10 ‘allow’ entries can be written through TFTP. # Up to 10 ‘allow’ entries can be written through Telnet # or embedded Web server.
- Page 52 Table 3.2 lists the supported TFTP parameters (HP Jetdirect firmware version x.25.00 or later). Table 3.3 describes the TFTP parameters. Table 3.2 List of Supported TFTP Parameters (1 of 2) General passwd: sys-location: sys-contact: TCP/IP Main host-name: domain-name: dns-svr: TCP/IP Print Options...
- Page 53 Table 3.2 List of Supported TFTP Parameters (2 of 2) SNMP snmp-config: get-cmnty-name: set-cmnty-name: IPX/SPX ipx-config: ipx-unit-name: ipx-frametype: ipx-sapinterval: ipx-nds-tree: AppleTalk appletalk: name-override: DLC/LLC dlc/llc: Other Settings link-type: webscan-config: scan-idle-timeout: scan-email-config: Support support-name: support-number: ENWW auth-trap: trap-dest: ipx-nds-context: ipx-job-poll: ipx-banner: ipx-eoj: ipx-toner-low: MFP-config:...
- Page 54 A password (up to 16 alphanumeric characters) that allows administrators to control changes of HP Jetdirect print server configuration parameters through Telnet, HP Web Jetadmin, or embedded Web server. The password may be cleared by a cold reset. sys-location: Identifies the physical location of the printer (SNMP sysLocation object).
- Page 55 Table 3.3 TFTP Configuration File Parameters (2 of 10) pri-wins-svr: The IP address of the primary Windows Internet Name Service (WINS) server. sec-wins-svr: The IP address of the secondary Windows Internet Name Service (WINS) server. smtp-svr: The IP address of the outgoing e-mail Simple Mail Transport Protocol (SMTP) server, for use with supported Scan devices.
- Page 56 TCP/IP Access Control allow: netnum [mask] Makes an entry into the host access list stored on the HP Jetdirect print server. Each entry specifies a host or network of hosts that are allowed to connect to the printer. The format is “allow: netnum [mask]” where netnum is a network number or host IP address, and mask is an address mask of bits applied to the network number and host address to verify access.
- Page 57 By default, the HP Jetdirect print server uses LPR as the source facility code, but local user values of local0 through local7 can be used to isolate individual or groups of print servers.
- Page 58 Enables or disables the print server’s embedded Web server to change configuration values: 0 disables, 1 (default) enables. tcp-mss: Specifies the maximum segment size (MSS) that the HP Jetdirect print server will advertise for use when communicating with local subnets (Ethernet MSS=1460 bytes or more) or remote subnets (MSS=536 bytes): 0 (default): All networks are assumed to be local (Ethernet MSS=1460 bytes or more).
- Page 59 Specifies a password that determines which SNMP SetRequests (control functions) the HP Jetdirect print server will respond to. The community name of an incoming SNMP SetRequest must match the print server’s “set community name” for the print server to respond. (For additional security, you may limit configuration access through the print server’s host access list).
- Page 60 (default), EN_SNAP, EN_8022, EN_8023, EN_II, TR_8022, TR_SNAP. ipx-sapinterval: Specifies the time interval (1 to 3600 seconds) that the HP Jetdirect print server waits between Service Advertising Protocol (SAP) broadcasts on the network. The default is 60 seconds. 0 disables SAP broadcasts.
- Page 61 Table 3.3 TFTP Configuration File Parameters (8 of 10) ipx-banner: Enables or disables printing an IPX banner page. 0 disables banner pages. 1 (default) enables banner pages. ipx-eoj: Enables or disables IPX end-of-job notification. 0 disables, 1 (default) enables. ipx-toner-low: Enables or disables IPX toner-low notification.
- Page 62 0 (default): disables client software support (allows printing only). 1: enables client software support (allows printing and scanning). usb-mode: Specifies the communication mode over the USB port on the HP Jetdirect print server. Auto (default): Automatically negotiates and sets the the highest communication mode possible for the attached printer or device.
- Page 63 Table 3.3 TFTP Configuration File Parameters (10 of 10) Support support-name: Typically used to identify the name of a person to contact for support of this device. support-number: Typically used to specify a phone number or extension to call for support of this device.
Page 64: Using Dhcp
- Page 65 “scope,” of IP addresses that the Windows server can assign or lease to any requester. When configured for BOOTP or DHCP operation and powered on, the HP Jetdirect print server automatically sends a BOOTP or DHCP request for its IP configuration.
- Page 66 7. In the Lease Duration section, select Unlimited, then select OK. HP recommends that all printers be assigned infinite leases to avoid problems resulting from IP addresses that change. Be aware, however, that selecting an unlimited lease duration for the scope causes all clients in that scope to have infinite leases.
- Page 67 8. Skip this step if you have assigned unlimited leases in the previous step. Otherwise, select Scope and select Add Reservations to set up your printers as reserved clients. For each printer, perform the following steps in the Add Reserved Clients window to set up a reservation for that printer: a.
- Page 68 Once the address appears in the list of IP addresses, select OK. This returns you to the DHCP Options window. If the address you have just added appears in the list of IP addresses (near the bottom of the window) return to step 10d.
- Page 69 8. Set the IP address lease duration for your DHCP clients. Then click Next. HP recommends that all printers be assigned reserved IP addresses. This can be accomplished after you set up the scope (see step 11). 9. Select No to configure DHCP options for this scope later. Then click Next.
- Page 70 NetWare Systems NetWare 5.x servers provide DHCP configuration services for network clients, including the HP Jetdirect print server. To set up DHCP services on a NetWare server, refer to Novell documentation and support. To Discontinue DHCP Configuration CAUTION Changes to an IP address on your HP Jetdirect...
- Page 71 Note If you choose to re-enable a DHCP configuration, the print server will acquire its configuration information from a DHCP server. This means that when you choose DHCP and complete your configuration session (using Telnet, for example), the TCP/IP protocol for the print server is re-initialized and all current configuration information is deleted.
Page 72: Using Rarp
- Page 73 7. Edit the /etc/ethers file (/etc/rarpd.conf file in HP-UX 10.20) to add the LAN hardware address/station address (from the configuration page) and the node name for the HP Jetdirect print server. For example: 00:01:E6:a8:b0:00 laserjet1 If your system uses Network Information Service...
Page 74: Using The Arp And Ping Commands
- Page 75 Depending on the system, the LAN hardware address may require a specific format. For example: For Windows NT 4.0, 2000, XP arp -s 192.168.45.39 00-01-E6-a2-31-98 ping 192.168.45.39 For UNIX arp -s 192.168.45.39 00:01:E6:a2:31:98 ping 192.168.45.39 Note Once the IP address has been set on the print server, additional arp and ping commands will be ignored.
Page 76: Using Telnet
- Page 77 <Jetdirect IP Address> <system IP Address> where <Jetdirect IP address> is the IP address configured on the HP Jetdirect print server, and <system IP address> is the IP address of the workstation's network card that is attached to the same physical LAN as the print server.
- Page 78 A Typical Telnet Session Initiating a typical Telnet session is illustrated below. TCP/IP Configuration 78 ENWW...
- Page 79 <IP address> is the IP address listed on the Jetdirect configuration page. See 2. A connection to the HP Jetdirect print server will be displayed. If the server responds with “connected to IP address”, press Enter twice to make sure that the Telnet connection is initialized.
- Page 80 Command Line Interface (Default) Using the Telnet command line interface, you can set configuration parameters using the following procedures: During a Telnet session, enter ? to view available Note configuration parameters, the correct command format, and a list of commands. To list additional (or advanced) commands, enter the command advanced befored entering ?..
- Page 81 UNIX, that support input/output redirection). Description Set the administrator password (shared with the embedded Web server and HP Web Jetadmin). For example, “passwd jd1234 jd1234” sets the password to jd1234. Note that “jd1234” is entered twice for confirmation.
- Page 82 Table 3.4 Telnet Commands and Parameters (2 of 18) sys-location sys-contact ssl-state security-reset Wireless 802.11Main Settings Command network-type desired-ssid encryption wep-key-method ENWW Alpha-numeric string (up to 255 characters), typically used to identify a location. Alpha-numeric string (up to 255 characters), typically used to identify the name of a network or device administrator.
- Page 83 Table 3.4 Telnet Commands and Parameters (3 of 18) wep-key transmit-key desired-channel auth-type ENWW Specify a static WEP (Wired Equivalent Privacy) encryption key. The print server can store up to four WEP keys using four key positions (Key 1, 2, 3, 4). To enter a WEP key, specify the key position followed by the encryption key value.
- Page 84 Table 3.4 Telnet Commands and Parameters (4 of 18) server-auth svr-auth-user ENWW This command requires that you specify a dynamic encryption option (dynamic-encrypt command) and EAP 802.1x authentication (wpa-auth-type command). Use this command to specify server-based authentication methods used on your network. For a brief description of supported authentication protocols, see None: (default) Server-based network authentication is not used.
- Page 85 Table 3.4 Telnet Commands and Parameters (5 of 18) svr-auth-pass svr-auth-id wpa-auth-type psk-passphrase dynamic-encrypt ENWW Specify a password for server-based authentication. Up to 128 alphanumeric characters may be used. Specify the CA certificate character string that will be used to identify and validate the authentication server. This string will be compared to an identification string received from the authentication server.
- Page 86 Table 3.4 Telnet Commands and Parameters (6 of 18) 802.11 Wireless Diagnostics Command Current SSID Current Channel Signal Strength Access Point Mac TCP/IP Main Settings Command host-name ip-config ENWW Description (Read-only parameter) The network name (SSID) to which the wireless print server connected. (Read-only parameter) The channel that the wireless print server is currently using.
- Page 87 192.168.40.1 as the IP address of the default gateway for the print server. Note: If the HP Jetdirect print server is configured by DHCP and you manually change the subnet mask or the default gateway address, you should manually change the print server’s IP address.
- Page 88 Table 3.4 Telnet Commands and Parameters (8 of 18) TCP/IP Print Options Command 9100-printing ftp-printing ipp-printing lpd-printing banner interlock mult-tcp-conn buffer-packing write-mode TCP/IP LPD Queues Command addq deleteq ENWW Description Enables or disables printing to TCP port 9100 on the print server.
- Page 89 Description Makes an entry into the host access list stored on the HP Jetdirect print server. Each entry specifies a host or network of hosts that are allowed to connect to the printer. The format is “allow netnum [mask]” where netnum is a...
- Page 90 ENWW Specifies the maximum number of syslog messages that can be sent by the HP Jetdirect print server on a per-minute basis. This setting allows administrators to control the log file size. The default is 10 per minute. If it’s set to zero, the number of syslog messages is not restricted.
- Page 91 Table 3.4 Telnet Commands and Parameters (11 of 18) mdns-pri-svc ttl-slp ipv4-multicast idle-timeout user-timeout cold-reset ews-config ENWW Specifies the mDNS highest priority service to use for printing.To set this parameter, choose one of the following printing option numbers: 1: Port 9100 printing 2: IPP port printing 3: The default LPD raw queue 4: The default LPD text queue...
- Page 92 DHCP Renew Time ENWW Specifies the maximum segment size (MSS) that the HP Jetdirect print server will advertise for use when communicating with local subnets (Ethernet MSS=1460 bytes or more) or remote subnets (MSS=536 bytes): 0: (default) All networks are assumed to be local (Ethernet MSS=1460 bytes or more).
- Page 93 Specifies a password that determines which SNMP GetRequests the HP Jetdirect print server will respond to. This is optional. If a user-specified get community name is set, the print server will respond to either a user-specified community name or the factory-default.
- Page 94 NDS context for the HP Jetdirect print server. Specifies the time interval (1 to 255 seconds) that the HP Jetdirect print server will wait to check for print jobs in a print queue. The default is 2 seconds. Enables or disables printing an IPX banner page through Printer Job Language (PJL).
- Page 95 ENWW Enables or disables IPX toner-low notification through PJL. 0 disables, 1 (default) enables. (Token Ring only) Configures the HP Jetdirect print server with the IPX/SPX source routing used on the network. auto (default): Source routing is automatically sensed from the network.
- Page 96 Table 3.4 Telnet Commands and Parameters (16 of 18) DLC/LLC Settings Command dlc/llc-config strict-8022 Other Settings Command link-type webscan-config scan-idle-timeout scan-email-config MFP-config ENWW Description Enables or disables DLC/LLC protocol operation on the print server. 0 disables, 1 (default) enables. For example, dlc/llc-config 0 will disable DLC/LLC operation.
- Page 97 URL to access HP Web Jetadmin will be specified. (Read-only parameter) If HP Web Jetadmin discovers this device, the name of the HP Web Jetadmin host will be specified (if known). Typically used to identify the name of a person to contact for support of this device.
- Page 98 Table 3.4 Telnet Commands and Parameters (18 of 18) support-url tech-support-url Menu Interface An optional Menu interface is displayed when you type menu at the Telnet command prompt. The Menu interface eliminates the need to memorize commands, and provides structured menu lists for easy access to configuration parameters.
- Page 99 Figure 3.1 Example: Using the Menu Interface Main Menu ------------------------------- 1. General Menu 2. TCP/IP Menu... 3. SNMP Menu... 4. IPX/SPX Menu 5. AppleTalk Menu 6. DLC/LLC Menu 7. Other Settings 8. Support Settings 9. Wireless Settings ?. Help e. Exit Menu 0.
Page 100: Using The Embedded Web Server
Page 101: using the printer control panel, page 102: moving to another network.
- Page 103 Using the Embedded Web Server Introduction HP Jetdirect print servers contain an embedded Web server that can be accessed from a compatible Web browser over an intranet. The embedded Web server provides access to configuration and management pages for the HP Jetdirect print server and the attached network device (such as a printer or multifunction, all-in-one device).
- Page 104 HP Jetdirect Home Figure 4.1 Typical HP Jetdirect Home Tab Networking Tab Menu items in left margin Figure 4.2 HP Jetdirect Networking Tab For network parameter descriptions, see ENWW “Networking Using the Embedded Web Server 104 Tab”.
Page 105: Requirements
Page 106: viewing the embedded web server.
- Page 107 HTTPS. See Mgmt. Value-based, non-upgradeable HP Jetdirect print servers (for example HP Jetdirect 175x and 200m) do not support a secure embedded Web server. 4. An embedded Web server page will be displayed, either the Home page of the HP Jetdirect print server or a device page served by a Web server on the device.
- Page 108 Features and configuration parameters not supported by value-based print servers, such as HP 175x and 200m, will not appear. Novell NetWare networks: On the Network Settings page, use the IPX/SPX tab to configure Novell Directory Services (NDS) Queue Server mode parameters.
Page 109: Hp Jetdirect Home Tab
- Page 110 The length of time since either the HP Jetdirect print server or the network device was last powered off/on. A text string (stored on the HP Jetdirect print server) for the name of a person to contact for this device. See TCP/IP on Networking Tab.
Page 111: Networking Tab
- Page 112 In addition, you may also configure basic TCP/IP settings at the same time. The configuration parameters are summarized in more information on setting up your HP Jetdirect wireless print server, see Appendix The 802.11b tab displays a single, static page that contains all wireless configuration parameters required to make a wireless connection to your network.
- Page 113 Ad Hoc mode include Independent Basic Service Set (IBSS), and “computer-to-computer" mode. The factory-default mode configured on the HP Jetdirect print server is Ad Hoc. To initially communicate with the print server, your wireless computer must be set up for Ad Hoc mode.
- Page 114 Item Description Network Name Specifies the name of the wireless network to which the HP Jetdirect print server will connect. The Network Name is also called the SSID (Service Set Identifier) and identifies the ESS (Extended Service Set) that is normally associated with larger Infrastructure Mode networks.
- Page 115 Table 4.3 802.11B Configuration Parameters (3 of 7) Item Description Enable Protocols Enable (check) or disable (clear) the EAP protocols supported by the print server. LEAP: (Lightweight Extensible Authentication Protocol). LEAP is a Cisco Systems, Inc. proprietary protocol. LEAP requires an EAP User Name and EAP Password.
- Page 116 Table 4.3 802.11B Configuration Parameters (4 of 7) Item Description Server ID (EAP-TLS, EAP-TTLS only) Specify the Server ID validation string that identifies and validates the authentication server. The Server ID string is specified on the digital certificate issued by a trusted Certificate Authority (CA) for the authentication server.
- Page 117 Table 4.3 802.11B Configuration Parameters (5 of 7) Item Description Authentication Enable (check) or disable (clear) this checkbox to control Behavior: authentication when you click Apply on this page, assuming valid Reauthenticate configuration entries have been made. on Apply Note: This parameter does not apply to security or wireless configuration wizards.
- Page 118 Encrypt transmit data using: Select the current active key. The HP Jetdirect print server can store up to four WEP keys using four key positions (Key 1, 2, 3, 4). But there can be only a single active key for a given network (or SSID) at a time. Key 1 is the default active key.
- Page 119 Table 4.3 802.11B Configuration Parameters (7 of 7) Item Description Dynamic For dynamic encryption, you may select one of the following options: Basic Encryption: Dynamic WEP encryption is supported. Robust Encryption: Dynamic Wi-Fi Protected Access (WPA) and WEP encryption protocols are supported. When configured for EAP/PSK authentication, the print server uses Robust Encryption (WPA encryption protocols).
- Page 120 IP Address Use this field to manually assign the Internet Protocol address on the HP Jetdirect print server. The IP address is a four byte (32-bit) address in the form "n.n.n.n", where 'n' is a number from 0 to 255.
- Page 121 Specifies the maximum number of syslog messages that can be Messages sent by the HP Jetdirect print server on a per-minute basis. This setting allows administrators to control the log file size. The default is 10 per minute. If set to zero, no maximum number is defined.
- Page 122 Banner Page Specifies whether to enable or disable printing of an LPD banner page for print jobs. For HP Jetdirect external print servers that provide multiple ports, you can configure each port. For internal print servers, only a single port is available (Port 1).
- Page 123 Enables or disables the IPX/SPX protocols on the HP Jetdirect print server. If the checkbox is empty, IPX/SPX is disabled. IPX/SPX Frame Specify the IPX/SPX frame type to be used by the HP Jetdirect Type print server on your network. After a frame type has been configured, all others will be counted and discarded.
- Page 124 IPX/SPX Settings (2 of 2) Item Description Print Server Name Specify a NetWare printer name for the HP Jetdirect print server (alphanumeric characters only). The default name is NPIxxxxxx, where xxxxxx are the last six digits of the HP Jetdirect print server's LAN hardware (MAC) address.
- Page 125 DLC/LLC Using the checkbox provided, you can enable (check) or disable (clear) the DLC/LLC (Data Link Control/Logical Link Control) protocols on the HP Jetdirect print server. If the checkbox is clear, DLC/LLC protocols are disabled. ENWW Table 4.6...
- Page 126 SNMP You can specify or change the SNMP (Simple Network Management Protocol) parameters provided. See If you use HP Web Jetadmin to manage your CAUTION devices, you should use HP Web Jetadmin to seamlessly configure SNMP v3 and other security settings on the print server.
Page 127: Other Settings
- Page 128 Enable or disable port 9100 services. Port 9100 is an HP-proprietary raw TCP/IP port on the HP Jetdirect print server and is the default port for printing. It is accessed by HP software (for example, the HP Standard Port). FTP Printing Enable or disable File Transfer Protocol services available on the HP Jetdirect print server for printing.
- Page 129 Link settings (For wired 10/100TX networks only) Set the network link speed(10 or 100 Mbps) and communication mode (full- or half-duplex) for HP Jetdirect 10/100TX print servers. The available settings are listed below. CAUTION: If you change the link setting, network communications with the print server and network device may be lost.
- Page 130 Full: Up to five pages of full diagnostic information will be printed.; These pages will contain detailed status of the print server at the time the error was detected. HP support personnel may be required to interpret the pages. None: A diagnostic page will not be printed.
- Page 131 AIO software scanning facility installed on client computers through software support supplied with the HP multifunction device (MFP or All-in-One). If disabled, the print server will not allow client software device functions other than network printing. Support for the print server’s Web Scan function is controlled separately.
- Page 132 Specifies the mDNS highest priority service to use for printing.To Priority Service set this parameter, choose one of the following printing options: 9100 Printing: Raw IP printing through HP-proprietary port 9100. IPP Printing: Internet Printing Protocol printing. LPD Printing (RAW): Default LPD raw queue printing.
- Page 133 Note If you are upgrading from a version prior to X.24.00 series, you must perform the upgrade again if supported non-English languages are desired. LPD Queues The LPD Queues page allows you to specify LPD (line printer daemon) print queues on the Jetdirect print server. For more information on LPD printing and print queues, see “Configuring for LPD LPD printing must be enabled on the print server before you can...
- Page 134 Table 4.9 LPD Queue Parameters (1 of 3) Item Description Queue Name Name of the user-defined queue. This name can be up to 32 characters long, and can consist of any displayable ASCII characters. You can define up to six user-defined queues. Prepend String Enter the name of one or more strings to be added before (or Name...
- Page 135 RAW -- No processing. The line printer daemon treats the data in a raw queue as a print job that has already been formatted in PCL, PostScript, or HP-GL/2, and sends it to the printer without modification. (Note that any user-defined prepend or append string will be added to the job in the appropriate position.)
- Page 136 Table 4.9 LPD Queue Parameters (3 of 3) Item Description Value The content of the string. The String Name parameter names the string; the Value parameter defines its content. When a string name is specified for a prepend or append string (in the table at the top of the browser window), the line printer daemon sends the value of that string to the printer before or after the print data (as appropriate).
- Page 137 Example. If you had an LPD printer and wanted to reset it at the start of each print job, you could set up a user-defined print queue named “clear_printer” that issues a PCL reset command (Escape-E) at the beginning of each job. You could set this up as follows: First, set up the print queue: a.
- Page 138 USB Settings If the HP Jetdirect print server provides a USB connection to the network device (such as a USB printer), a link to USB configuration parameters will be displayed. See Table 4.10 USB Settings USB Item USB Speed Desired...
- Page 139 Status (default), Wizard, Restore Defaults. The available settings depend on your particular print server model. Value-based, non-upgradeable HP Jetdirect print servers (for example HP Jetdirect 175x and 200m) do not support a secure embedded Web server. Using the Embedded Web Server 139...
- Page 140 The Wizard page allows you to run the HP Jetdirect Security Configuration Wizard. This wizard will guide you through the print server’s security configuration needed for your network. Click Start Wizard to run the wizard.
- Page 141 Enable SNMPv3: (Full-featured print servers only) Enable SNMP v3 and create an SNMP v3 account. Creating an SNMP v3 account is not recommended if you manage devices using HP Web Jetadmin. See SNMP. Enable SNMPv1/v2 read-only access: Enable this option to allow support of current tools that rely on SNMP v1/v2 for device discovery and status.
- Page 142 Enable SNMPv3: (Full-featured print servers only) Enable this option to create an SNMP v3 account. Creating an SNMP v3 account is not recommended if you manage devices using HP Web Jetadmin. See SNMP. The Authorization page is used to set up an Access Control List, if desired to control host access to the device.
- Page 143 Jetdirect configuration and status information. The administrator password is shared by Jetdirect configuration tools, such as the embedded Web server, Telnet, and HP Web Jetadmin. In addition, for selected EIO printers, the password is shared with the printer (see...
- Page 144 Security page and the networking Admin. Account page. Certificates (Full-featured HP Jetdirect print servers only) This tab provides access to installation, configuration and management services for X.509 digital certificates. A digital certificate is an electronic message typically containing, among other things, a key (a short string used for encryption and decryption) and a digital signature.
- Page 145 Certificates. A CA certificate is not saved when the print server is reset to factory-default values. The maximum certificate size that can be installed on the HP Jetdirect print server is 3072 bytes. Configuring Certificates When you click Configure, a certificate management wizard will help you update or install a certificate.
- Page 146 Note If you improperly exit Certificates configuration (for example, by failing to use the Cancel button), an Operation Failed screen may appear. If so, wait approximately two minutes before entering the wizard again. Table 4.12 Certificate Configuration Screens (1 of 4) Certificate Options Choose from the options listed.
- Page 147 Table 4.12 Certificate Configuration Screens (2 of 4) Install CA Certificate. (Wireless print servers only) This option is provided when you click Configure for a CA certificate, which must be installed for selected wireless authentication protocols. Using this option, you are prompted for information in the following screen: Install Certificate Import Certificate and Private Key.
- Page 148 Use this page to enter information for requesting a certificate from a Certificate Authority. Common Name. (Required) For HP Jetdirect print servers, specify the fully qualified domain name or a valid IP address for the device. Examples: Domain Name: myprinter.mydepartment.mycompany.com IP address: 192.168.2.116...
- Page 149 Access Control Use this tab to display the Access Control List (ACL) on the HP Jetdirect print server. An access control list (or host access list) specifies individual host systems, or networks of host systems, that will be allowed to access the print server and the attached network device.
- Page 150 CAUTION Use caution when using this feature. You may lose your ability to communicate with the HP Jetdirect print server if your system is not properly specified in the list, or access through HTTP is disabled. For use of the host access list as a security feature,...
- Page 151 HTTPS. Redirection of your browser to use HTTPS may be transparent depending on your browser’s capabilities. HP wireless print servers, by factory default, are configured to require HTTPS communications. HP wired print servers, by factory default, are configured to allow HTTPS or HTTP.
- Page 152 SNMP v3 agent. For a description of SNMP selections, see SNMP v3. The HP Jetdirect print server includes an SNMP v3 (Simple Network Management Protocol, version 3) agent, for enhanced SNMP security. The SNMP v3 agent employs a User-based Security Model for SNMP v3 (RFC 2574), which features user-authentication and data privacy through encryption.
- Page 153 CAUTION You should disable Telnet and ensure secure embedded Web communications through HTTPS is enabled before creating the initial SNMP v3 account. This will help to prevent access or interception of account information over a connection that is not secure. SNMP v1 and v2c agents can coexist with the SNMP v3 agent.
- Page 154 Network Statistics This page is used to display counter values and other status information currently stored on the HP Jetdirect print server. This information is often useful to diagnose performance and operational problems associated with the network or network device.
Page 155: Other Links
- Page 156 Help The Help page in the Networking tab provides a quick summary of the HP Jetdirect embedded Web server features. In the Help page, a link to the latest information on the embedded Web server is provided (Internet access is required).
- Page 157 The HP Jetdirect print server contains an LPD (Line Printer Daemon) Server module to support LPD printing. This chapter describes how to configure the HP Jetdirect print server for use with various systems that support LPD printing. These instructions include:...
- Page 158 Line Printer Daemon (LPD) refers to the protocol and programs associated with line-printer spooling services that may be installed on various TCP/IP systems. Some of the widely used systems in which the HP Jetdirect print server functionality supports LPD include: Berkeley-based (BSD) UNIX systems...
Page 159: Lpd Setup Overview
- Page 160 (user-defined print queues can be set up through Telnet, embedded Web server, If the queue name is not one of the above, the HP Jetdirect print server assumes it to be raw1. Step 3. Printing a Test File Print a test file using the LPD commands.
Page 161: Lpd On Unix Systems
- Page 162 :sd=/usr/spool/lpd/lj1_raw: If your printer does not support automatic switching between PostScript, PCL, and HP-GL/2 languages, use the printer's control panel (if the printer has one) to select the printer language or rely on the application to select the printer language via commands embedded in the print data.
- Page 163 PostScript, or other printer language) files. Before you execute the SAM program, select an IP address for the HP Jetdirect print server and set up an entry for it in the /etc/hosts file on your system running HP-UX. 1. Start the SAM utility as a superuser.
- Page 164 Examples (for BSD-based systems): lpq -Ptext1 lpq -Praw1 For HP-UX systems, substitute lpstat for lpq -P to get print status. This completes the process for configuring the HP Jetdirect print server to use LPD.
Page 165: Lpd On Windows Nt/2000 Systems
- Page 166 2. If you have not previously installed the software: Windows 2000—In the Local Area Connection Properties window, click Install. In the Select Network Component Type window, select Protocol and click Add to add the Internet Protocol (TCP/IP). Follow the instructions on the screen. NT 4.0—Click the Add button for each tab and install the TCP/IP Protocol and the Microsoft TCP/IP Printing service.
- Page 167 Enter the DNS name or IP address of the HP Jetdirect print server. b. For the name of the printer or print queue on the HP Jetdirect print server, enter (in lowercase) raw, text, auto, binps, or the name of a user-defined print queue...
- Page 168 Note The HP Jetdirect print server treats text files as unformatted text or ASCII files. Files that are raw are formatted files in PCL, PostScript, or HP-GL/2 printer languages. If the queue type is binps, the PostScript interpreter is instructed to interpret the print job as binary PostScript data.
- Page 169 5. Select LPR Port, and click New Port. 6. In the Name or address of server providing lpd box, type the IP address or DNS name of the HP Jetdirect print server. NT clients can enter the IP address or name of the Note NT server that is configured for LPD printing.
Page 170: Lpd On Windows Xp Systems
- Page 171 Type the Domain Name System (DNS) name or Internet protocol (IP) address of the HP Jetdirect print server. b. Type (in lowercase) the name of the print queue for the HP Jetdirect print server (for example: raw, text, auto, or binps.)
- Page 172 New Port. 5. In the field labeled Name or address of server providing lpd, enter the DNS name or IP address of the HP Jetdirect print server. 6. In the dialog box labeled Name of printer or print queue on that...
Page 173: Lpd On Mac Os Systems
- Page 174 OK. The default name is the printer's IP address, and the default location is on the desktop. 11. Exit the program. For the latest information on using the HP Jetdirect LPD services from Mac OS systems, search for “LPR printing” at Apple Computer's Tech Info Library Web site at http://til.info.apple.com.
- Page 175 HP Jetdirect-connected printer. In an FTP printing session, the client connects and sends a print file to the HP Jetdirect FTP server which in turn passes the print file to the printer.
Page 176: Print Files
- Page 177 Control Connection Using standard FTP, a control connection is opened by the client to the FTP server on the HP Jetdirect print server. FTP control connections are used to exchange commands between the client and the FTP server. The HP Jetdirect print server supports up to four control connections (or FTP sessions) simultaneously.
- Page 178 In addition, the available HP Jetdirect ports for printing will be displayed. HP Jetdirect internal print server cards provide a single port (Port 1). HP Jetdirect external print servers with multiple ports will display all available ports, with Port1 the default port.
- Page 179 Commands Table 6.1 summarizes commands available to the user during an FTP printing session. Table 6.1 User Commands for HP Jetdirect FTP Server (1 of 2) Command user <username> cd <port#> cd / quit put <filename>...
- Page 180 Table 6.1 User Commands for HP Jetdirect FTP Server (2 of 2) Command ascii Ctrl C rhelp remotehelp ENWW Description Configures an FTP ASCII file transfer. HP Jetdirect print servers support only non-print format control for character transfers (standard values for spacing and margins are used).
Page 181: Example Of An Ftp Session
- Page 182 Security features are provided that can help to minimize unauthorized access to network configuration parameters and other data stored on HP Jetdirect print servers. The features may differ depending on the version of firmware resident on the print server. CAUTION...
- Page 183 Network Protocol Control Network printing, printing services, device discovery, and management protocols on the HP Jetdirect print server can be enabled or disabled. By disabling unused or unnecessary protocols, unauthorized access through applications that use these protocols can be prevented.
- Page 184 IP Access Control List Specifies up to 10 host systems, or networks of host systems, that are allowed access to the HP Jetdirect print server and the attached network device. Access is generally limited to host systems specified in the list.
- Page 185 Summary of HP Jetdirect Security Features (3 of 3) SNMP v1/v2c Set Community Name (IP/IPX) (SNMP v1/v2c only) A password on the HP Jetdirect print server that allows incoming SNMP Set commands (for example, from management software) to write (or set ) HP Jetdirect configuration parameters.
Page 186: Using Security Features
- Page 187 Table 7.2 Settings for Access Control Settings Unused protocols disabled HTTPS access enabled using certificates issued by trusted sources Wireless Jetdirect print servers configured for 802.1x EAP authentication that use dynamic encryption SNMP v3 enabled, SNMP v1/v2c disabled Telnet disabled Passwords set The Access Control List contains specified entries and...
- Page 188 Printer problems HP Jetdirect hardware installation and connection problems Network-related problems To troubleshoot your HP Jetdirect print server, you may need the following items: A Jetdirect configuration page (see A Printer Configuration or Diagnostic Page Documentation that came with your printer...
Page 189: Resetting To Factory Defaults
- Page 190 HP Jetdirect Internal LIO Print Servers Reset HP Jetdirect LIO print servers by holding down the Test button on the print server while inserting the print server into the LIO slot. Because the LIO print server receives its power from the printer, the printer must be turned on.
Page 191: General Troubleshooting
- Page 192 Make sure the printer is turned on. Make sure the HP Jetdirect print server is installed correctly. 4. Is the form feed light on (where applicable)? If the form feed light is on, it may indicate that a Form Feed was not sent with the print data, and that data is waiting for a Form Feed to print.
- Page 193 The HP Jetdirect configuration page is an important troubleshooting tool. The information on this page reveals the status of your network and the HP Jetdirect print server. The ability to print a configuration page provides an indication that the printer is operating correctly. See on the HP Jetdirect configuration page.
- Page 194 For internal Jetdirect cards, turn the printer off and back on again. Reinstall the HP Jetdirect print server to ensure it is installed correctly, and verify all connectors are fully mated. If possible, print an HP Jetdirect configuration page and verify all configuration parameters.
- Page 195 3. Does a 40 ERROR appear on the printer’s control panel display? The HP Jetdirect print server detected a break in the data communications. When this error occurs, the printer goes offline. A break in communications may result from the physical network connection being disrupted or the server going down.
- Page 196 This information assumes you have already printed a Jetdirect configuration page. 1. Are there any physical connection problems between the workstation or file server and the HP Jetdirect print server? Verify network cabling, connections, and router configurations. Verify that network cable lengths meet network specifications.
- Page 197 7. Is your protocol enabled on the HP Jetdirect print server? Check the status of your protocol on the Jetdirect configuration page. See Chapter 9 (On TCP/IP networks, you can also use the embedded Web server to check status of other protocols. See 8.
- Page 198 12. Does the printer appear in HP Web Jetadmin or other management application? Verify network and HP Jetdirect settings on the Jetdirect configuration page. See configuration page. Confirm the network settings for the printer using the printer control panel (for printers with control panels).
Page 199: Troubleshooting Wireless Print Servers
- Page 200 My Configured Channel Does Not Match the Configuration Page (Ad Hoc mode only) The HP configuration tools allow you to select channel 10 (default) or 11 on the HP Jetdirect wireless print server. This channel is only used by the print server to broadcast its Network Name (SSID) if it fails to detect and join an existing wireless network.
- Page 201 Unable to Use the HP Jetdirect Wireless Setup Wizard The HP Jetdirect Wireless Setup Wizard (Windows) is used to configure the HP Jetdirect wireless print server with wireless network connection settings to access your network. If you are unable to use this wizard, refer to other options described in the HP Jetdirect Administrator’s Guide for this print server...
- Page 202 Access Point’s antenna will improve the range and performance of all wireless devices. Add an external antenna to the HP Jetdirect wireless print server (if it supports one). In most office environments, elevating the print server’s external antenna will improve its range and performance.
- Page 203 If Server-Based Authentication Is Not Used If a firmware download failure occurs on an HP Jetdirect wireless print server that is not configured for server-based authentication, simply restart the download process and try again. If it is powered off/on, the print server will regain its previous configuration prior to the download failure.
- Page 204 3. Configure the wireless network settings on the computer to match the default settings on the HP Jetdirect wireless print server: Communication Mode: Ad Hoc Network Name (SSID): hpsetup Encryption (WEP): <disabled or turned off> Note Due to the state of the HP Jetdirect wireless print...
Page 205: Troubleshooting An Lpd Unix Configuration
- Page 206 (Example: power is turned off to fix a paper jam.) Use the HP-UX command lpstat -Pqname to find out if the queue has been disabled after the printer has powered up again or the connection is reestablished.
- Page 207 Network statistics gathered by the print server are also provided. The HP Jetdirect configuration page may be printed directly on the attached printer. The format of the Jetdirect configuration page depends on:...
Page 208: Configuration Page Format
- Page 209 Section Name HP Jetdirect Identifies the HP Jetdirect print server and provides general status. Configuration or For information on items in this section, see General...
Page 210: Configuration Page Messages
- Page 211 HP Jetdirect 10/100TX port is enabled (ON) or disabled (OFF). ON (default): The HP Jetdirect print server will attempt to automatically configure itself onto the network at the proper speed (10 or 100 Mbps) and mode (half or full duplex).
- Page 212 USB Printer Settings This section applies to HP Jetdirect external print servers with USB printer connections only. USB information on the HP Jetdirect configuration page is described in some information may not be available. Table 9.2 USB Settings Message Device Name...
- Page 213 SSID. Check your specified SSID, or check status of the Access Point (Infrastructure mode) or other wireless devices. The print server will continue to scan for the specified SSID. HP Jetdirect Configuration Page 213...
- Page 214 Infrastructure Mode: The MAC address or name of the Access Point to which the Jetdirect wireless print server is connected. Ad Hoc Mode: A random number or name generated by the initiator of the Ad Hoc network. HP Jetdirect Configuration Page 214...
- Page 215 EAP: (Infrastructure mode only) IEEE 802.1x Extensible Authentication Protocol (EAP) uses network authentication servers for client access. HP Jetdirect EAP support includes LEAP, PEAP, EAP-MD5, EAP-TLS, and EAP-TTLS authentication protocols. An authentication failure may indicate that the EAP authentication server has rejected the print server’s authentication requests.
- Page 216 Specifies whether an IP Administrator password has been configured on the print server. This password is shared by Telnet, the embedded Web server, and HP Web Jetadmin to control access to print server configuration parameters. Up to 16 case-sensitive, alphanumeric characters can be used.
- Page 217 (“p”) enabled. Specifies whether an SNMP set community name has been configured on the HP Jetdirect print server. An SNMP set community name is a password for write access to SNMP control functions (SNMP SetRequests) on the HP Jetdirect print server.
- Page 218 A large number may indicate a cabling problem on the network. Total number of Token Ring frames received by the HP Jetdirect print server with code violations or CRC (Cyclic Redundancy Check) errors. A large number may indicate faulty cabling on your network.
- Page 219 Frame Status (FS) field. The number of Token Ring frames received with frame length errors. The number of Token Ring frames lost. Total number of times a violation of the token-passing protocol has been detected. HP Jetdirect Configuration Page 219...
- Page 220 LAN hardware (MAC) address. The Internet Protocol (IP) address assigned to the HP Jetdirect print server. This is a required entry for operation of the print server on a TCP/IP network. During initialization, a temporary value 0.0.0.0 is displayed. After two minutes, a default IP address 169.254/16 or...
- Page 221 If not provided, the IP address of the Jetdirect print server is used. NOT SPECIFIED: Indicates that a default gateway is not configured. Identifies how the HP Jetdirect print server obtained its IP configuration: BOOTP: Automatic configuration through a BOOTP server. BOOTP/TFTP: Automaticautomatic configuration through a BOOTP server and TFTP configuration file.
- Page 222 NOT SPECIFIED: Indicates that a TFTP server has not been not been set. The name of the HP Jetdirect configuration file. The file pathname may be truncated to fit on two lines. NOT SPECIFIED: Indicates that a file was not specified in the BOOTP reply from the host.
- Page 223 WEB JETADMIN URL: ENWW Description If the HP Jetdirect print server is found on the network by HP Web Jetadmin, the URL of the host system used for HP Web Jetadmin services is displayed. The URL is limited to two lines and may be truncated.
- Page 224 TYPE: ENWW Description Indicates the current IPX/SPX protocol status. READY: Indicates the HP Jetdirect print server is awaiting data over IPX/SPX. DISABLED: Indicates that IPX/SPX was manually disabled. INITIALIZING: Indicates that the print server is registering the node address or name. An additional status message may also be displayed.
- Page 225 Description The first column (Network) indicates the network number associated with a protocol frame type used for communication between a server and the HP Jetdirect print server. UNKNOWN: Indicates that the HP Jetdirect print server is still trying to determine which network number to use.
- Page 226 NetWare network organized in a hierarchical tree structure. NOT SPECIFIED or blank: NDS is disabled. Displays the fully qualified NDS name where the HP Jetdirect print server object resides in the NDS tree. For example: CN=lj_pserver.OU=support.OU=mycity.OU=mycompany NOT SPECIFIED or blank: NDS is disabled.
- Page 227 NOT SPECIFIED or blank: A NetWare server has not been configured. (Job Poll Interval) Specifies the time interval (seconds) that the HP Jetdirect print server waits to check for print jobs in a print queue. The default is 2 seconds. Specifies the time interval (seconds) that the HP Jetdirect print server waits between Service Advertising Protocol (SAP) broadcasts on the network.
- Page 228 The type of the printer being advertised on the network. Two types can be displayed. NETWORK NUMBER: Identifies the AppleTalk Network Number on which the HP Jetdirect print server is currently operating. NODE NUMBER: Identifies the AppleTalk Node Number that the print server chose for itself as part of its initialization sequence.
- Page 229 STATUS: ENWW Description Indicates the current DLC/LLC protocol status. READY: Indicates the HP Jetdirect print server is awaiting data. DISABLED: Indicates that DLC/LLC was manually disabled. INITIALIZING: Indicates that the print server is registering the node address or name. An additional status message may also be displayed.
- Page 230 Ring Failure: The HP Jetdirect print server times out when attempting a ring purge after becoming the active monitor; that is, the HP Jetdirect print server is unable to receive its own ring purge data frames. Ring Beaconing: The HP Jetdirect print server receives a beacon data frame after physically inserting into the ring.
- Page 231 The following Ring Status may be detected: Ring Recovery: The HP Jetdirect print server has received claim-token data frames on the ring. The HP Jetdirect print server may be transmitting the claim-token frames. Single Station: The HP Jetdirect print server has sensed that it is the only station on the ring.
Page 232: Error Messages
- Page 233 (Token Ring) The HP Jetdirect print server could not insert into the ring and join the network. Check the data rate switch on the HP Jetdirect print server to make sure it is set correctly. For information on setting the data rate switch, see the HP Jetdirect internal print server hardware installation guides.
- Page 234 REBOOT 14 DISCONNECTED 15 CONFIGURATION ERROR 16 NOT CONFIGURED (Ethernet) The HP Jetdirect print server has not been ENWW Description (Wired Ethernet) There may be a problem with your network cabling or the HP Jetdirect print server. Check the cabling and connectors on your network.
- Page 235 NOT DEFINED ENWW Description (Ethernet) The HP Jetdirect print server was unable to find the NetWare print server (Remote Printer mode) or file server (Queue Server mode). (There was no response to service queries for advertising print servers or file servers that matched the configured print server or file server name.)
- Page 236 CONNECT TO SERVER 1E FAIL RESERVING PRINTER NUM 1F ERR NEGOTIATING BUFFER SIZE 20 UNABLE TO LOGIN A failure was detected when the HP Jetdirect print server 21 UNABLE TO SET PASSWORD 22 UNABLE TO CONNECT TO SERVER ENWW Description...
- Page 237 The print server sent some data when the HP Jetdirect print server had not given its permission to do so. This indicates a possible print server problem, possibly a software problem.
- Page 238 The file server on the network cannot be located. The server may not be running at this time or a communications problem may exist. The HP Jetdirect print server object cannot be located in the specified NDS context. Cannot locate a list of printers objects that should be assigned to the print server object.
- Page 239 Print Server Object Name mismatch. Unable to read the print server’s public key. Verify object names. Verify that the object key assigned to the HP Jetdirect print server is a print server object and not a printer or other object.
- Page 240 TFTP ERROR packet to the print server. The TFTP transfer of the configuration file from the host to the HP Jetdirect print server failed with the local print server encountering some form of inactivity timeout, or excessive retransmissions situation.
- Page 241 The tagsize in a vendor-specific field in the BOOTP reply is either 0, or greater than the remaining number of unprocessed bytes in the vendor-specified area. The HP Jetdirect print server is currently in the process of obtaining its basic IP configuration information through BOOTP/RARP.
- Page 242 (for example, the embedded Web server) using non-English languages. The HP Jetdirect print server is trying to connect to the NetWare server(s). This is a normal message. Wait until either the connection is established or another status message appears.
- Page 243 That task can be performed by higher level protocols and applications thereby allowing IP communications to be efficient. Each node or device that will communicate directly onto the network requires an IP address, including HP Jetdirect-connected devices. ENWW...
Page 244: Ip Address
- Page 245 IP Address: (Network Portion) Network addresses are managed by an organization in Norfolk, Virginia recognized as InterNIC. InterNIC has been contracted by the National Science Foundation to manage the Internet addresses and domains. Network addresses are distributed to organizations that are in turn responsible for making sure all attached devices or hosts on the network are properly numbered.
- Page 246 IP Address Structure and Class An IP address is comprised of 32 bits of information and divided into 4 sections containing 1 byte each section or 4 bytes total: xxx.xxx.xxx.xxx For efficiency in routing, networks were broken down into three classes, so routing can begin simply by identifying the leading byte of information in the IP address.
Page 247: Configuring Ip Parameters
Page 248: subnets, page 249: gateways.
- Page 250 UDP does not guarantee delivery of messages. The HP Jetdirect print server attempts to eliminate duplicate messages (to minimize unnecessary network traffic). The volume of messages sent by the HP Jetdirect print server is configurable. Methods to configure HP Jetdirect syslog parameters include BOOTP, DHCP, Telnet, the embedded Web server, and management software.
- Page 251 Typical logfile entries of syslog messages are illustrated below: Oct 22 08:10:33 jd08 printer: error cleared Oct 22 15:06:07 jd04 printer: powered up Oct 22 15:07:56 jd04 printer: offline or intervention needed Oct 22 15:08:58 jd04 printer: error cleared Oct 24 17:52:27 jd37 printer: powered up Oct 24 18:28:13 jd37 printer: printer is disconnected Oct 24 18:37:46 jd07 printer: error cleared Oct 24 18:38:42 jd37 printer: powered up...
Page 252: Introduction
Page 253: basic hp jetdirect wireless concepts.
- Page 254 In addition, the distance between a wireless device and the Access Point will affect performance; longer distances degrade data transmission rates. ENWW Access Point in enterprise workgroup Residential Gateway as Access Point Access Point as Wireless Repeater HP Jetdirect 802.11b Wireless Print Servers 254...
- Page 255 Jetdirect Peer-to-Peer printing refers to a client's direct print path to a printer, without routing through a network server to a shared printer. Note that HP Jetdirect Peer-to-Peer printing can be used on either Infrastructure or Ad Hoc (Peer-to-Peer) mode wireless topologies.
- Page 256 (channels 10 or 11) until it associates with the specified network. In Infrastructure Mode, the channel will be determined by the Access Point to which the print server connects. The HP Jetdirect print server, as with other clients, will adapt its channel to the one required.
- Page 257 HP Jetdirect print servers support a broadcast SSID, sometimes called a zero-length or “blank” SSID. If a blank SSID is configured in Infrastructure mode, the print server will attempt to associate with the network SSIDs detected, starting with the strongest signal.
- Page 258 Consequently, the authentication method is closely associated with encryption options also used on the network. The authentication methods supported by the HP Jetdirect wireless print servers include: EAP/PSK. Open System. Open System authentication is used when positive validation of a device's identity is not required for network access.
- Page 259 Protocol) is used on networks that use authentication servers, such as a RADIUS (Remote Authentication Dial In User Service, RFC 2138) server, for client authentication on a network. HP Jetdirect 802.11b wireless print servers support popular authentication methods based on EAP, including: LEAP (Lightweight Extensible Authentication Protocol).
- Page 260 Or certificates may be “self-signed”, which is similar to validating your own identity. To support EAP/PSK and selected EAP/802.1x authentication methods, an HP Jetdirect print server may need to contain one or both of the following certificates: CA Certificate. A certificate from a trusted Certificate Authority (CA) is used to validate certificate information received from an authentication server.
- Page 261 The HP Jetdirect print server can store up to four static WEP keys, although only one is active at a time. These WEP keys will remain the same (hence, static) until the network administrator changes them.
- Page 262 EAP/802.1x authentication methods PEAP, EAP-TLS, EAP-TTLS. Robust Encryption provides for dynamic WPA and WEP encryption protocols. If WPA dynamic encryption is not supported by your HP Jetdirect wireless print server, EAP/PSK authentication and Robust Encryption selections will not be available.
Page 263: Installation Overview
- Page 264 Configure a Wireless Connection to Your Network To be able to communicate on your network, the HP Jetdirect print server must have a wireless connection to your network. To set up the print server with a wireless connection, you must first configure it with wireless settings for your network.
- Page 265 To Set Up Your Wireless Computer for Jetdirect Communications To initially communicate with your new HP Jetdirect wireless print server, you may need to do the following: 1. Run your wireless client manager or wireless NIC configuration utility. 2. Change your computer's wireless network settings to match the...
- Page 266 Using Your Web Browser (Windows and Mac OS) Using the HP Jetdirect Wireless Setup Wizard (Windows). To use the HP Jetdirect Wireless Setup wizard, your wireless computer must be running one of the following operating systems: Microsoft Windows 98, Me, NT 4.0, 2000, XP, Server 2003.
- Page 267 HP Jetdirect wireless print server with a connection to your Mac OS network. To use this utility, the HP Jetdirect wireless print server must be in a factory-default state. Proceed as follows: 1. Insert the CD-ROM into your Mac OS system.
- Page 268 (This means that there must be a match between the network identification of your system to that of the HP Jetdirect print server. If the print server is configured with its default IP address, for example 169.254/16 or 192.0.0.192, a route may not exist.)
- Page 269 5. Open your Web browser and enter the IP address set on the HP Jetdirect print server as the URL. Communication with the print server is established when the Jetdirect print server’s embedded Web pages are displayed. Note If the Jetdirect embedded Web pages fail to display, try disabling the Web proxy server if your computer’s Web browser is configured to use one.
- Page 270 TCP/IP networking settings (such as an IP address). For information on TCP/IP networking, Appendix 1. Inspect your HP Jetdirect configuration page (see verify that your computer’s wireless network settings match the factory-default wireless settings on the HP Jetdirect print server.
- Page 271 HP Jetdirect print server. 3. If necessary, change the computer’s IP address so that it is on the same IP subnet as the HP Jetdirect print server. For example, if the default IP address of the print server is 192.0.0.192, you could use 192.0.0.193 on the computer.
- Page 272 Preferred Network, to match the Network Name (SSID) of the Jetdirect print server. Then click Apply Now. 4. Open your Web browser and enter the IP address of the HP Jetdirect print server as the URL. Communication with the print server is established when the Jetdirect print server’s embedded Web pages are displayed.
- Page 273 If you change the IP address and click Apply, you may lose communications with the print server. To reconnect, use the new IP address. 8. When your HP Jetdirect print server has been configured with your wireless network settings, click Apply. By default, AppleTalk should be enabled (click the Note AppleTalk tab for verification).
- Page 274 Install the Printer on Your Network To Verify the Wireless Network Connection When you have configured the HP Jetdirect print server with a wireless connection to your network, your network computers should be able to communicate with the printer. If so, you can then use printer installation software to install the printer on each system that will send print jobs directly to the printer.
- Page 275 (for example, Windows Add Printer or Macintosh Chooser), or HP-supplied utilities. HP utilities include the HP Install Network Printer Wizard for Microsoft Windows systems, and the HP LaserJet Utility for Apple Macintosh systems. These utilities are included on the HP Jetdirect CD-ROM and incorporated into printing system utilities supplied with many HP printers.
- Page 276 The HP Jetdirect Control Panel Menu Introduction When supported by the printer, HP Jetdirect internal print servers contain a configuration menu that can be accessed from the printer’s control panel. The keystrokes to access this menu from the printer control panel depend on the printer. Refer to the printer manuals for more information.
Page 277: Classic Control Panel
- Page 278 Table C.1 HP Jetdirect Classic Control Panel Menu (2 of 6) Menu Item Description SSID: Choose one of the following selections: CFG SSID: This item appears if SSID=<CUSTOM> was set. At the SSID= prompt, enter a custom SSID, one character at a time.
- Page 279 Table C.1 HP Jetdirect Classic Control Panel Menu (3 of 6) Menu Item Description CFG EAP: This item appears if AUTH.=EAP was set. Choose one of the following: NO (default): Bypass EAP configuration. YES: Enable (ON) or disable (OFF) the EAP protocol used on your network.
- Page 280 Table C.1 HP Jetdirect Classic Control Panel Menu (4 of 6) Menu Item Description ENCRYPT: For static WEP encryption, this item appears if AUTH.=OPEN (Open System), AUTH.=SHARED (Shared Key), or EAP-MD5=ON. Choose an encryption level: TX KEY: This item appears if you selected 128- or 64-bit encryption and is used to specify the active transmit key.
- Page 281 Table C.1 HP Jetdirect Classic Control Panel Menu (5 of 6) Menu Item Description CFG TCP/IP= Selects whether you want to access the TCP/IP menu and set TCP/IP protocol parameters. NO (default): Bypass the TCP/IP menu items. YES: Access the TCP/IP menu items.
- Page 282 Table C.1 HP Jetdirect Classic Control Panel Menu (6 of 6) Menu Item Description CFG LINK= (10/100Base-TX print servers only) Selects whether you want to manually configure the HP Jetdirect print server’s network link. NO (default): Bypass the link configuration menu items.
Page 283: Graphical Control Panel
- Page 284 Table C.2 HP Jetdirect Graphical Control Panel Menu (2 of 7) Menu Item Options AUTHENTICATION CONFIGURE EAP ENWW Description of settings Choose one of the following authentication methods for your network: OPEN SYSTEM: Network authentication is not required or used.
- Page 285 Table C.2 HP Jetdirect Graphical Control Panel Menu (3 of 7) Menu Item Options SECURITY CONFIGURE PSK ENWW Description of settings This menu is displayed only if EAP Authentication has been selected. Set the following parameters: USER NAME: Enter a User Name for the device.
- Page 286 Table C.2 HP Jetdirect Graphical Control Panel Menu (4 of 7) Menu Item Options ENCRYPTION CONFIGURE KEYS RESET 802.11b ENWW Description of settings This menu is displayed if you selected Open System, Shared Key, or EAP-MD5 authentication. Choose your static WEP key encryption level: 128-BIT WEP: Selects 104/128-bit WEP.
- Page 287 Table C.2 HP Jetdirect Graphical Control Panel Menu (5 of 7) Menu Item Options TCP/IP ENABLE HOST NAME CONFIG METHOD DHCP RELEASE DHCP RENEW ENWW Description of settings ON: Enable the TCP/IP protocol OFF: Disable the TCP/IP protocol An alphanumeric string, up to 32 characters, used to identify the device.
- Page 288 Table C.2 HP Jetdirect Graphical Control Panel Menu (6 of 7) Menu Item Options MANUAL SETTINGS (Available only if CONFIG METHOD is set to DNS SERVER IPX/SPX ENABLE FRAME TYPE SOURCE ROUTING ENWW Description of settings MANUAL) Configure parameters directly from the printer control panel: IP ADDRESS n.n.n.n: The unique IP...
- Page 289 Table C.2 HP Jetdirect Graphical Control Panel Menu (7 of 7) Menu Item Options ATALK ENABLE DLC/LLC ENABLE SECURE RESET SECURITY LINK SPEED ENWW Description of settings (Ethernet/Fast Ethernet only) ON: Enable the AppleTalk protocol OFF: Disable the AppleTalk protocol...
- Page 290 OpenSSL Statements OpenSSL License Copyright © 1998-2000 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Page 291 Original SSLeay License Copyright © 1995-1998 Eric Young ([email protected]). All rights reserved. This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscape’s SSL. This library is free for commercial and non-commercial use as long as the following conditions are adheared to.
- Page 292 46 identifying 221 BOOTP/DHCP IN PROGRESS BOOTP/RARP IN PROGRESS 241 browsers embedded web server 105 HP Web JetAdmin 23 BSD systems LPD printing 161 BURST ERRORS RCVD 218 CA certificate 145, 260 embedded Web server 116 Cert Expires 216...
- Page 293 UNKNOWN KEYWORD 240 channel wireless communications 83, 113, 255, 256 Chooser, Apple 35, 197 clients, supported HP IP/IPX Printer Gateway 30 Internet Printer Connection 26 software solutions 17 cold-reset 189 Communication Mode classic control panel 277 embedded Web server 113...
- Page 294 EAP-MD5 12, 115, 259 EAP-TLS 12, 115, 259 EAP-TTLS 12, 84, 115, 259 EIO control panel menu 277 embedded Web server HP Web JetAdmin 105 HTTPS security 151, 183 LPD setup 133 NetWare objects 108 TFTP configuration file 58 upgrading firmware 132...
- Page 295 Host Access List, See Access List HOST NAME 220 BOOTP tag 48 embedded Web server 120 Telnet 86 TFTP file 54 HP IP/IPX printer gateway for NDPS 29 HP Jetdirect cold-reset 189 configuration page messages configuration page, how to print 193...
- Page 296 Index IP address 220 Bootptab file 47 configuring 247 default 39 embedded Web server 106, 120 erasing through Telnet 100 printer control panel 101 resetting 189 TCP/IP overview 244 IP, See TCP/IP IP/IPX printer gateway 29 Internet Printer Connection 18, 26 TFTP configuration 55 ipv4-multicast embedded Web server 128, 154...
- Page 297 210 product list 8 Multicast Domain Name System (mDNS) embedded Web server 128, 154 Telnet 90 TFTP 57 NDPS, See HP IP/IPX printer gateway for NDPS ENWW AUTHENTICATION ERROR CONNECTION STATE ERROR 239 Context 226 PRINT OBJ QUEUE LIST...
- Page 298 EIO control panel menu 277, supported 8 PRINT SERVER NOT DEFINED printcap file 161 printer control panel 101, 276 printer gateway, See HP IP/IPX printer gateway for NDPS PRINTER NUMBER IN USE 235 PRINTER NUMBER NOT DEFINED 235 printer, selecting with Apple...
- Page 299 189 RING BEACONING 230 FAILURE 230 RECOVERY 231 Robust Encryption dynamic encryption 85, 119, SAM (HP-UX) print queues 163 SAP Interval 227 SCANNING FOR SSID 233 Secure Web configuration page entry 216 embedded Web server 151 Telnet configuration 82...
- Page 300 LOGIN 236 SENSE NET NUMBER 237 SET PASSWORD 236 UNEXPECTED PSERVER DATA RCVD 237 UNICAST PACKETS RCVD 218 UNIX (HP-UX and Solaris) networks, LPD printing 157 UNKNOWN NCP RETURN CODE 237 UNSENDABLE PACKETS 218 upgrades (software, driver, and flash image) 14...
- Page 301 User Datagram Protocol (UDP) datagram port control 130 mDNS configuration 128, 154 Validity Period certificates 147 Web JetAdmin URL See also, HP Web JetAdmin configuration page entry 223 embedded Web server link 155 WEP 260 control panel 280, 286 embedded Web server 118...
- Page 302 © 2004 Hewlett-Packard Development Company, L.P. English...
This manual is also suitable for:
Rename the bookmark, delete bookmark, delete from my manuals, upload manual.
- Sign up / Sign in
- × Information Need Windows 11 help? Check documents on compatibility, FAQs, upgrade information and available fixes. Windows 11 Support Center.
- HP Community
- Printer Wireless, Networking & Internet
Iphone printing via IP address to HP Jetdirect 300x
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Printer Friendly Page
Create an account on the HP Community to personalize your profile and ask a question
08-20-2021 07:46 AM
- Mark as New
- LaserJet printer
08-20-2021 07:55 AM
08-21-2021 02:48 AM
Didn't find what you were looking for? Ask the community
HP Jetdirect Print Server 170X Installation and Configuration
Summary of content (114 pages).
hp jetdirect_如何配置 HP Jetdirect 外置网络打印服务器的 IP 地址 优质
如何配置 hp jetdirect 外置网络打印服务器的 ip 地址.
请问HP Jetdirect 外置网络打印服务器的具体型号是什么？ 请提供上面的信息，可以扩展。 将HP Jetdirect 外置网络打印服务器和打印机使用数据线连接好后，按HP Jetdirect 外置网络打印服务器上的test按键，可以从打印机上打印出一个网卡配置页，在配置页上就可以看到该设备当前的ip地址了。 以下是修改外置打印服务器ip地址的方法： 1、如果HP Jetdirect的ip和电脑的ip是同一网段的，将HP Jetdirect的ip地址输入到电脑的ie中，就可以打开网卡的web界面了，里面有网络设置在ip address中就可以修改HP Jetdirect的ip地址了。2、如果HP Jetdirect的ip地址和电脑的ip不是同一网段的，先在电脑中将pc的ip设置为和打印机同一网段的ip：右击网上邻居的属性-选择本地网络右击属性-选择tcp/ip-手动设置ip地址：输入ip地址；win7修改电脑ip地址方法：点击开始——控制面板-选择“网络和Iternet”-选择网络和共享中心-然后选择更改适配器-在网络图标上右击选择“属性”-接下来选择“tcp/Ipv4”,在点击“属性”-选择“使用下面的ip地址”接下来即可修改电脑IP协议了，修改好后点击确定即可完成然后将HP Jetdirect的ip地址输入到这台电脑的ie中，就可以打开网卡的web界面了，里面有网络设置在ip address中就可以修改HP Jetdirect的ip地址 以上是具体的方法，可以操作试试看，有问题可以扩展。
如何配置 HP Jetdirect 外置网络打印服务器的 IP 地址[转]
对于第一种要求的用户建议您阅读全文，对于第二中要求的用户建议您仅阅读本文操作说明中的第四部分。适用范围： HP Jetdirect 170x 、 175x 、 300x 、 500x 。操作说明： 一、打印配置页以确定 HP Jetdirect 的TCP/IP 地址HP Jetdirect 当前的 TCP/IP 地址及其状态可以在其配置页上查看。使用 HP J etdirect 外置打印服务器的 Test 按钮打印配置页。建议在配置 HP Jetdirect 完后打印一篇配置页，以验证 TCP/IP 地址以及其它信息是否正确。 二、将 HP Jetdirect 重置为出厂默认设置 也称为冷启动，冷启动对下列情况很有帮助：由于 IP 地址冲突而导致无法 Telnet 到打印服务器，或者无法在 HP Web Jetadmin 、 Install Network Printer Wizard 或下面所列工具之一中看到打印服务器时。 冷启动将清除所有以前的 IP 地址或密码，并且会将打印机的配置重置为出厂默认值。出厂默认值的 TCP/IP 地址为 169.254.x.x 或 192.0.0.192 。如果未连接 LAN 电缆，或者如果打印服务器由于电缆、集线器损坏或 LAN 链路速度配置问题而无法检测网络连接，某些打印服务器可能将 TCP/IP 地址显示为 0.0.0.0 。 欲对HP Jetdirect 外置打印服务器进行冷启动，请从 HP Jetdirect 打印服务器上拔下电源线，并在重新插入电源线时按住 TEST 按钮（在 HP Jetdirect 的顶部或后面）约 30 秒后松手。 三、配置 HP Jetdirect 的TCP/IP 地址的方法 下面将讲述配置 TCP/IP 地址的几种方法： 1 、通过 Web 浏览器来使用 HP Jetdirect 打印服务器的嵌入式 Web 服务器 2 、通过从计算机上 Telnet 3 、使用如下惠普软件（详细信息请参见以下部分）： * HP Web Jetadmin * Install Network Printer Wizard (INPW) 本文仅介绍 使用 HP Jetdirect 嵌入式 Web 服务器 配置 HP Jetdirect 的 TCP/IP 地址的步骤，其他方法清参阅惠普网站的相关技术文档。 四、使用 HP Jetdirect 嵌入式 Web 服务器 固件版本为 x.07.03 或更高的 HP Jetdirect 打印服务器拥有可修改 TCP/IP 参数的嵌入式 Web 服务器。请参考 Jetdirect 配置页，查找打印服务器的现有 TCP/IP 地址。 如果HP Jetdirect 使用的是其默认 IP 地址，请在命令提示符下使用 “route add” 命令将 HP Jetdirect 的 IP 地址添加到计算机的路由表中。 HP Jetdirect 的默认 IP 地址通常是 169.254.x.x 或 192.0.0.192 。)评论(0)
hp打印服务器300x怎么设置ip
出现这个问题的可能性有很多，建议您可以直接拨打售后服务电话或者去惠普网上贴心服务输入型号找寻答案，上面有很详细的问题解答，没有对应答案也可以点左边的与工程师聊天来寻求在线解答。
hp jetdirect_如何配置 HP Jetdirect 外置网络打印服务器的 IP 地址
索尼爱立信k550c_索尼爱立信手机K550c(白色)这款手机怎样
尼康s6000_尼康s6000怎么样
lg p350_LG-P350功能介绍？
联想c200一体机_联想一体机C200配置
佳能110is_佳能 IXUS 110 IS怎么样
gt630显卡怎么样_gt630显卡怎么样
索尼nex 5n_我想知道索尼NEX-5N和NEX-F3的区别
东芝笔记本好不好_东芝笔记本怎样？以前没听说过!
gt640显卡怎么样_GT640 显卡怎么样？
IMAGES
VIDEO
COMMENTS
Select from the products you own. Sign in / Register HP Jetdirect 170x Print Server series Choose a different product series Warranty status: Unspecified - Check warranty status Troubleshooting Software, Drivers and Firmware How to Product Information Manuals Bulletins and Notices More Support Options Manuals Manuals in PDF format English
If JetDirect 170x has been used on a real network then the address will almost certainly have been changed. You can get it back to the default address by doing a cold reset. Unplug the power cord, then hold down the TEST button for 5 to 30 seconds while plugging in the power cord.
For new HP Jetdirect print servers that have not been configured with a TCP/IP address, proceed to Step 3. From the left side Navigation menu, select Device Management. Expand the Device Management folder. Expand the Device Lists folder. Highlight New Devices. Click the column header of your choice, such as IP Address or Device Model.
To re-establish a connection, use the new IP address. network number... Page 37 For the most recent list of tested systems, visit the HP Customer Care Online at www.hp.com/support/net_printing.
Change IP addy on a Jet Direct 170X - Printers general discussion - Tek-Tips Engineering.com Eng-Tips Make: Projects Engineering.tv Resources Log In Join Close Box Join Tek-Tips ® Today! Join your peers on the Internet's largest technical computer professional community. It's easy to join and it's free. Here's Why Members Love Tek-Tips Forums:
Procedure as follows: 1. Unplug the power to the Jetdirect. 2. Press and hold the 'Test' button while plugging the power back in for 5 seconds. 3. The Jetdirect should be reset now and is configured by default to obtain an IP address automatically. Take a DB25 male connector and connect pins 1, 10, 13 and 15 together. Plug in the DB25 connector.
In order to set configuration parameters, set up a Telnet connection from your system to the HP Jetdirect print server using the default IP address. The default IP address takes effect two minutes after the printer is turned on (if none of the other configuration methods have been used).
We have a model 170x; however, this procedure will work with many Jetdirect boxes. First off, you need to figure out the current IP address. Do this by pushing the system test button on the Jetdirect box. The current IP address and subnet mask will be listed.
I have HP jetdirect 170X series without it original CD. I would like to use to connect hp lj1100 printer. ... -Temporarily change the computers IP address to 192.0.0.1. -Now reset the Print ...
#Telnet commands to change ip of hp jetdirect 170x manual# We have a model 170x,however, this procedure will work with many Jetdirect boxes. To configure the Jetdirect must be used to read. If you ever need to reconfigure an HP Jetdirect, this can be done via telnet. Do this by pushing the system test button on the Jetdirect box.
#Telnet commands to change ip of hp jetdirect 170x how to. If you want more advice on how to lock down your network printer visit your vendors web site. However I feel this information will be useful to system administrators and auditors so that they know what sorts of things to look out for when it comes to network printers. Some of this ...
2/12/2009. You can get it back to the default address by doing a cold reset. Unplug the power cord, then hold down the TEST button for five to 30 seconds while plugging in the power cord. Worked for me! I just had to be patient, it seemed like it took another minute or two to finally respond to pings. rsly.
Then click Apply Now. 4. Open your Web browser and enter the IP address of the HP Jetdirect print server as the URL. Communication with the print server is established when the Jetdirect print server's embedded Web pages are displayed. Page 273 If you change the IP address and click Apply, you may lose communications with the print server. To ...
About Press Copyright Contact us Creators Advertise Developers Terms Privacy Policy & Safety How YouTube works Test new features NFL Sunday Ticket Press Copyright ...
Iphone printing via IP address to HP Jetdirect 300x Options Create an account on the HP Community to personalize your profile and ask a question Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more. Learn more
A network connection allows a device to be conveniently located for sharing by many users. In addition, it provides data throughput at network speeds. The HP Jetdirect 170X has an RJ-45 network port (10Base-T) for connecting the network. In addition, it has a single highspeed, bidirectional parallel port (IEEE 1284) for connecting your device ...
以下是修改外置打印服务器ip地址的方法： 1、如果HP Jetdirect的ip和电脑的ip是同一网段的，将HP Jetdirect的ip地址输入到电脑的ie中，就可以打开网卡的web界面了，里面有网络设置在ip address中就可以修改HP Jetdirect的ip地址了。2、如果HP Jetdirect的ip地址和电脑的ip不是 ...