- Working At Heights
Working at Height Risk Assessment Templates
Proactively identify hazards and help reduce risks in one of the leading causes of work-related injuries and fatalities
Working at Height Risk Assessment
Start using template
- Customize and create
- Use instantly
- Automatically generate reports from checklists
This working at heights procedure template can be used to improve safety when working at heights. Begin by recording the nature of work, identify activities associated with working at heights, and record the team working onsite. Next, determine potential risks like falling, slipping, or tripping. Then, proceed with evaluating controls like training, planning, and proper use of fall protection systems and equipment. Lastly, provide recommendations to improve working at height safety.
- Preview Sample Digital Report
- Preview Sample PDF Report
Updated 31 Jan 2023 , Published 18 Apr 2018
What is Working at Heights?
Working at heights is defined as the performance of work at an elevated height of two meters or higher where workers are exposed to the injury of falling. This type of work is common in the construction industry. Working at heights is one of the biggest causes of preventable work injuries and fatalities around the world.
Download Free Template
In this article
What is working at height risk assessment, top 5 hazards when working at heights, strategic planning when working at heights, general safety tips for working at height, sample working at heights procedure, safetyculture marketplace: your one-stop work gear & equipment shop, faqs about working at heights, technology to identify hazards when working at heights, top working at height templates.
A working at height risk assessment evaluates hazards and risks associated with working above ground/floor level. It is both a moral and legal obligation of employers to have a risk assessment done prior to working at heights in order to formulate and implement preventive measures against potential injuries and fatalities associated with working at heights.
Same as a regular risk assessment , a risk assessing while working at height involves the following steps:
- Identify hazards
- Evaluate the risks and determine who may be harmed
- Decide on protective, precautions, and control measures
- Document findings and implement them
- Review and update if necessary
Working at heights is dangerous in more ways than one. Several situations, elements, and factors contribute not only to the overall risk level, but also to the nature of the hazards safety officers and construction workers may face on any given day. Below are the top hazards encountered when working at heights:
1. Slips, Trips, and Falls
The lack of process implementation for idle tools and equipment can cause platforms to be littered; increasing the risk of accidental slips and trips which could lead to falls. Improper footwear can also cause slips and falls. Finally, workers who report for duty while under the influence of drugs or alcohol, or when ill or injured, are at a higher risk due to poor motor function. Safety officers must ensure that control measures are in place in order to prevent such situations where the risk of slips, trips, and falls are increased.
2. Falling Objects
Another risk associated with the lack of a proper clean-up process are falling objects or objects that dropped from heights. This can cause personal injury to workers as well as damages to tools or equipment at the worksite. While workers may have tools, equipment, and materials on an elevated platform for easy access, designating areas in which necessary items should be placed can drastically reduce the chances of objects from being knocked out of the platform and potentially injuring workers below.
Safety officers must ensure that all workers, especially the ones working below elevated work areas wear hard hats at all times.
3. Faulty Work Platforms and Scaffolds
Elevated working platforms such as scaffolds and towers are essential for working at heights. It can also be extremely dangerous for workers if they happen to malfunction due to poor design and execution. Safety officers and scaffold competent personnel must ensure that elevated work platforms follow OSHA standards and are regularly inspected so structural issues are quickly identified and resolved.
4. Fragile Roofing
Roofs are not designed to handle the weight of workers. If they need to be used as working platforms, a proper assessment must be done in order to determine the control measures needed to ensure safety. Construction personnel can use roof ladders or crawling boards designed to distribute a worker’s weight evenly on a wider area; allowing the roof to safely sustain the added weight.
5. Inclement Weather
Strong winds can damage structures and elevated work platforms. Rain and snow can make surface areas slippery, and fog can reduce overall visibility. During inclement weather, the safest action to take is to halt construction work. If it is absolutely necessary, safety officers must ensure that all workers have the proper training, and are fitted with the appropriate PPEs to reduce the risk of incidents, injuries, and fatalities on the job.
At the start of the job it is best practice to determine whether a task requires working at heights. Unless necessary, It is advisable to avoid working at heights and instead encourage workers to use extended or long handled tools for hard to reach locations.
In the event that the work requires working at heights, determine if falls and accidents are preventable. If so, proper equipment (i.e. Mobile Elevated Work Platforms, scaffolds, ladders, PPE) should be used and inspected at all times to ensure that they are in good working condition. If falls and accidents are at risk of occurring or not preventable then safety harnesses and fall protection landing gear should be installed.
Below is a flow-chart that summarizes the decision making process when planning on working at heights:
- Avoid working at heights when possible
- Use an existing safe place of work
- Minimize fall distance and consequences by using the right type of equipment
- Select quality PPE which is regularly inspected
- Always use the rails and fall protection barriers
- Be mindful of the fall distance. Never overload and overreach
- Determine the best anchor point to support you
- Select the correct gear when working at heights (scaffold, lift, ladder)
- Consider emergency and rescue procedures
- Train your team to be safety conscious
Construction workers should only work at heights when it is absolutely unavoidable. When the greenlight is given to work at height, the effective implementation of a standard procedure can drastically reduce the associated risks and hazards. Below is an example of a standard procedure when working at heights:
Perform a thorough inspection of elevated platforms and PPEs
Check the load-bearing capacity of platforms and fall arrest equipment, check worker fitness and competency before allowing them to work at heights, secure objects, equipment, and tools when elevated, immediately report identified risks and hazards to concerned personnel.
Improve safety in your workplace with SafetyCulture Marketplace as your one-stop shop for all work gear and equipment needs. Get on-demand access to top quality and specialized work gear from trusted equipment brands in the industry—all in one centralized location. Raise the bar of safety and efficiency by empowering employees to request what they need with just a few taps, anytime and anywhere!
Yes. Since working at height poses risks to workers, it remains one of the biggest causes of fatalities and serious injuries, especially when there are lacking or no precautions in place to help prioritize worker safety. Hence, a thorough risk assessment is a must for this type of risky job.
Working at height which can result to falling is mainly considered a safety hazard. Situations wherein site workers and office employees are exposed to the risk of potentially losing their balance or bodily support can lead to accidents and serious injuries.
The most common hazards associated with working at height include the following:
- Inadequate risk assessment
- Defective Personal Protective Equipment (PPE)
- Incorrect use of or faulty ladders
- Lack of training and experience
- Platform collapse
- Bad weather conditions
- Falling objects
Considering the high fatality and injury rates associated with working at heights, it makes perfect sense for companies to invest in the best tools and equipment to minimize such risks.
Using SafetyCulture (formerly iAuditor) as a safety inspection tool, safety officers and construction workers can improve risk assessment practices so issues are identified and resolved ASAP.
Take advantage of these industry-leading features to ensure the safety of your workers:
- Download ready-to-use working at heights templates via our public library , convert your existing paper templates into SafetyCulture’s digital format, or create one from scratch using our drag-and-drop template builder . No coding required.
- Customize template response types so you can filter responses and get the data you want. Take pictures and annotate them mid-inspection for a more comprehensive and detailed report.
- Assign actions to the right personnel when risks and hazards are identified to cut the lag time between issue identification and resolution.
- Automatically generate and send comprehensive, professional reports after completing your inspections. No need to manually compile data. Streamline safety reporting with automatic report-sharing.
- Keep your inspection data safe via unlimited cloud storage. Using custom permissions, you can ensure that only authorized personnel can access your inspection data.
Working At Height Risk Assessment Template
This working at height risk assessment template can be used to identify risk activities associated with working at height. This template includes a risk matrix to help identify the likelihood of the severity of risks identified onsite. Take photos of hazards and document all observations. Use the hierarchy of controls reference to identify the type of controls used to mitigate the working at height risks. Browse other risk assessment templates here .
Working At Height Toolbox Talk
This toolbox talk meeting record is ideally used before commencing working at height. Encourage your team to identify and share hazards associated with work for the day as well as following up on previously unresolved hazards. Record what was discussed during the working at heights toolbox talk and have all participating members sign off on the SafetyCulture app.
Working At Height - Ladder Inspection Checklist
Using ladders can be fatal if not correctly inspected and used. This template to assess the risk of ladders and help minimise incidents involving ladders. Start by recording the ladder profile, labels and parts. Then capture photo evidence of damages, dents and other deformities. Lastly, rate the overall condition of the ladder and provide recommendations. Click here for more ladder safety template resources .
Working At Height - Scaffolding Safety Inspection
Use this template to ensure a stable foundation of a scaffold before working on it. Assess the risk of using a scaffold by checking the structure of the scaffold, its base, height, and dimensions. Next, inspect the components and capture photo defects. Finally, rate the overall condition of the scaffold and ensure the correct tagging is in place.
Safety Harness Working At Height Template
Use this template to ensure fall protection by using a safety harness when working at heights. Start by checking the labels to determine the type, model and date of manufacturer of the harness. Next, capture photos of the harness and its components (snap hooks, lanyard and tie-off adaptors/anchorages) and determine if it is in good quality before use. Complete the inspection by providing recommendations and comments.
Working At Height Safety PPE Checklist
Wearing the proper equipment reduces the possibility of falling, slipping, and tripping when working at heights. Use this working at height safety PPE checklist to describe the hazard, select suitable PPE, then check the quality of PPE and take photo for further evidence of observation. Lastly, summarize the inspection by providing recommendations.
SafetyCulture Content Specialist
Jona Tarlengco
Jona Tarlengco is a content writer and researcher for SafetyCulture since 2018. She usually writes about safety and quality topics, contributing to the creation of well-researched articles. Her 5-year experience in one of the world’s leading business news organisations helps enrich the quality of the information in her work.
Explore more templates
This working at height risk assessment template can be used to identify risk activities associated with working at height. This…
Download free Read more
This toolbox talk meeting record is ideally used before commencing working at height. Encourage your team to identify and share…
Using ladders can be fatal if not correctly inspected and used. This template to assess the risk of ladders and…
Use this template to ensure a stable foundation of a scaffold before working on it. Assess the risk of using…
Use this template to ensure fall protection by using a safety harness when working at heights. Start by checking the…
Wearing the proper equipment reduces the possibility of falling, slipping, and tripping when working at heights. Use this working at…
Related pages
- Post Construction Cleaning Checklist
- Erosion and Sediment Control Plan Template
- 10 Free Construction Inspection Forms
- Hoist Inspection
- Field Level Hazard Assessment
- Emergency Action Plan
- Compressed Air Safety
- Horizon Scanning
- Pile Driving
- Construction Management Software
- Excavation Safety Software
- Top 10 Construction Software
- Lone Worker Safety Devices
We use cookies to provide necessary website functionality and improve your experience. To find out more, read our updated Privacy Policy .
Assessing all work at height
What you need to do.
The law requires that employers and self-employed contractors assess the risk from work at height and go on to organise and plan the work so it is carried out safely.
Try avoiding work at height, if you can. You must otherwise prevent or arrest a fall and injury if work at height is necessary.
Instruct and train your workforce in the precautions needed. Method statements are widely used in the construction industry to help manage the work and communicate what is required to all those involved.
Key issues for all work at height are:
Risk assessment
Precautions required, method statements.
Work at height is the biggest single cause of fatal and serious injury in the construction industry, particularly on smaller projects.
Over 60% of deaths during work at height involve falls:
- from ladders, scaffolds, working platforms and roof edges
- through fragile roofs or rooflights
Employers and self-employed contractors must:
- Assess the risks
- Decide on the precautions required
- Record the significant findings
- Review the assessment as necessary
Do not overcomplicate the process. For many firms your work at height risks will be well known and the necessary control measures easy to apply.
Follow HSE's Managing risks and risk assessment at work information.
The law on work at height requires that you take account of your risk assessment in organising and planning work and identifying the precautions required. Your objective is to make sure work at height is properly planned, supervised and carried out in a safe manner.
The approach you can adopt for work at height is to follow the work at height hierarchy of controls : The hierarchy must be followed systematically and only when one level is not reasonably practicable may the next level be considered.
It is not acceptable to select work equipment from lower down the hierarchy e.g. personal fall arrest, such as harnesses and lanyards in the first instance.
Before working at height, you must work through these simple steps:
The hierarchy of control measures with practical examples
- Avoid working at height unless it is essential e.g. erect guard rails on steelwork at ground level and then crane the steel and the guard rails into position; provide cast in mesh across riser ducts at the position of services; fix nets using extending poles
- Prevent falls by using an existing safe place of work that does not require the use or addition of work equipment to prevent a fall e.g. a flat roof with permanent edge protection
- Prevent falls by using work equipment that protects all those at risk e.g. access equipment fitted with guard rails, such as independent scaffolds, tower scaffolds, mobile elevating work platforms (MEWPs) and mast climbing work platforms (MCWPs)
- Prevent falls by using work equipment that protects the individual e.g. a harness with a short lanyard which makes it impossible for a person to get to a fall position (this is called work restraint)
- Mitigate falls by using work equipment to minimise the distance and consequences of a fall and protect all those at risk e.g. nets or soft-landing systems positioned close under the work surface
- Mitigate falls by using work equipment to minimise the distance and consequences of a fall and protect the individual e.g. a personal fall arrest system with the anchorage point sited above the head, or a rope access system
- Mitigate falls by using work equipment that minimises the consequences of a fall e.g. nets rigged at a lower level, or inflatable injury protection
- Mitigate falls through training, instruction or other means e.g. ensure ladders are inspected regularly and are used by competent people, demarcate areas to provide a warning, provide adequate lighting, apply sensible housekeeping measures, provide suitable footwear etc
A method statement is a useful way of recording the hazards involved in specific work at height tasks and communicating the risk and precautions required to all those involved in the work. The statement need be no longer than necessary to achieve these objectives effectively.
The method statement should be clear and illustrated by simple sketches where necessary. Avoid ambiguities or generalisations, which could lead to confusion. Statements are for the benefit of those carrying out the work and their immediate supervisors and should not be overcomplicated.
Equipment needed for safe working should be clearly identified and available before work starts. Workers should know what to do if the work method needs to be changed.
Is this page useful?
Working at Height Risk Assessment
Working at height can be dangerous if the proper safety measures are not taken. In this blog post, we will discuss the steps needed to complete a Working at Height Risk Assessment. By following these steps, you can ensure that your workers are safe when working at height.
A risk assessment is a careful examination of what in your workplace could cause harm to people so that you can weigh whether you have taken enough precautions or should do more to prevent harm.
By law, employers are required to assess the risks in their workplace to implement a plan to control the risks.
- Identifying the hazards.
- Deciding who might be harmed and how.
- Evaluating the risks and deciding on precautions.
- Recording your findings and implementing them.
- Reviewing your assessment and update if necessary.
Step 1: Identifying the Hazards
The first step of a risk assessment is to identify the hazards that are present in the workplace. You can identify the hazards through the following:
- Workplace observations.
- Obtaining feedback from employees.
- Checking the manufacturer’s instructions or data sheets for any equipment.
- Reviewing past accidents and ill-health records.
This could involve looking out for things such as slip and trip hazards, lone-working, manual handling, cleaning chemicals or fire risks, etc.
For working at height activities, the Work at Height Regulations 2005 state that the following factors also need to be considered in the risk assessment:
- The working conditions and the risks to the safety of people at the place where any work equipment is to be used.
- The distance and consequences of any potential fall.
- The duration and frequency of use of work equipment.
- The necessity for an easy and timely evacuation and rescue in an emergency .
- Any additional risk posed by the use, installation, or removal of work equipment or by the evacuation and rescue from it.
- Whether the work equipment is appropriate to the nature of the work to be performed.
- Whether the work equipment allows passage without risk.
Step 2: Deciding Who Might be Harmed
The second step in work at height risk assessment involves looking at each hazard and then identifying the people who may be harmed by them. These people may be:
- Specific groups of employees.
- Customers and members of the public.
Some employees also have particular requirements, such as:
- Young workers.
- Expectant mothers.
- People with disabilities.
- People who are not at work always, such as part-timers and sub- contractors .
Make sure that you consider every person involved in the work area where the hazard is present.
Step 3: Evaluating the Risks
The next step in the risk assessment is to evaluate the hazards you have identified and decide whether they can be eliminated. If not, how can you control the risks so that harm is unlikely? You could consider:
- Trying an option that is less risky.
- Preventing access to the hazard.
- Re-organizing work to reduce or control exposure.
- Issuing personal protective equipment (PPE) .
- Training staff to ensure they understand the hazards and precautions to be taken.
Think about the control measures you already have: are these sufficient? Do you need to improve them or introduce new control measures?
4: Recording Your Findings
It is recommended that you write down your findings from the risk assessment; even though there are less than 5 employees in your business, this is not required by law.
You need to be able to show that:
- A proper check was made.
- You have considered who might be affected.
- You have dealt with all the obvious significant hazards, taking into account the number of people who could be involved.
- The precautions are reasonable, and the remaining risk is low.
- Staff or their representatives have been involved.
Recording your findings means using the risk assessment template below. Use a fresh risk assessment sheet for each assessment you complete and for each area of the workplace. Ensure that you have dated the risk assessment, recorded details of who the assessor was, and written down the action due dates and completion dates.
Step 5: Reviewing and Updating
You should regularly check, such as every 6-12 months, to see whether any workplace changes may affect your risk assessment. For example:
- Are there any improvements still to be made?
- Has there been employee feedback?
- Have you learned anything from accidents and near misses?
- Has any new equipment or machinery been introduced?
- Do you have any new employees that require training?
You should also update the risk assessment on an as-and-when basis to ensure it remains up-to-date. For example, if you have a new staff member, there is an accident, or you introduce some new equipment.
I have accumulated over four years of experience in the safety industry, which enables me to bring substantial knowledge and expertise to any organization I collaborate with. My previous work involved partnering with diverse businesses, from construction sites to general industries. As a result, I recognize the crucial significance of ensuring safety measures are in place to safeguard workers and customers.
Similar Posts
What Do Employees Need To Know About Work At Height?
The Safety, Health, and Welfare at Work Act 2005 places duties on employees to: Comply with statutory provision such…
Factors to Consider When Identifying Control Measures for Work At Height
Working at height can be dangerous if the correct safety measures are not taken. To mitigate the risks associated…
Training & Retraining Requirements For The Hazards Associated With Falls
Training The employer must provide information and training to each employee prior to exposure to hazards and in a…
Test Your Risk Assessment Knowledge | MCQs Test
Working at Height Hazards, You Need to Know
Working at height is an ordinary requirement for many trades, such as roofers, tree surgeons, and painters. While it…
What is the Hazard & How to Identify the Hazard?
Here are the common definitions of the terms hazard, risk, risk assessment and control as they apply in the workplace….
Leave a Reply Cancel reply
Your email address will not be published. Required fields are marked *
Our range of over 180 online courses are fully accredited, trusted by more than 2 million learners and ideal for training you and your team.
- Food Hygiene
- Health and Safety
- Safeguarding
- Asbestos Awareness
- Fire Safety
- Mental Health
- Health and Social Care
- Business Essentials
- Team training
Welcome to the Hub, the company blog from High Speed Training.
Select a topic to find the most up to date, practical information and resources produced by our experts to support you in your professional life.
- Health & Safety
Working at Height Risk Assessment
A risk assessment is a careful examination of what in your workplace could cause harm to people. It enables you to weigh up whether you have taken enough precautions, or should do more to prevent harm.
By law, employers are required to assess the risks in their workplace so that they can put in place a plan to control the risks. It’s crucial for you to know how to carry risk assessments out, not only to comply with this legal requirement but also to ensure people can work safely.
Creating a Working at Height Risk Assessment
There are 5 key steps of a working at height risk assessment:
- Identifying the hazards.
- Deciding who might be harmed and how.
- Evaluating the risks and deciding on precautions.
- Recording your findings and implementing them.
- Reviewing your assessment and updating if necessary.
Risk Assessment Step 1: Identifying the Hazards
The first step of a risk assessment is to identify the hazards that are present in the workplace.
You can identify the hazards through:
- Workplace observations.
- Obtaining feedback from employees.
- Checking the manufacturer’s instructions or data sheets for any equipment.
- Reviewing past accident and ill health records.
This could involve looking out for things such as slip and trip hazards, lone-working, manual handling, cleaning chemicals or fire risks etc.
For working at height activities, the Work at Height Regulations 2005 state that certain work-specific factors also need to be considered in the risk assessment.
These factors are:
- The working conditions and the risks to the safety of people at the place where any work equipment is to be used.
- The distance and consequences of any potential fall.
- The duration and frequency of use of work equipment.
- The necessity for an easy and timely evacuation and rescue in an emergency.
- Any additional risk posed by the use, installation or removal of work equipment or by the evacuation and rescue from it.
- Whether the work equipment is appropriate to the nature of the work to be performed.
- Whether the work equipment allows passage without risk.
Risk Assessment Step 2: Deciding Who Might be Harmed
The second step in the work at height risk assessment involves looking at each specific hazard and then identifying the people who may be harmed by them.
People at risk may include:
- Specific groups of employees.
- Customers and members of the public.
Some employees also have particular requirements, such as:
- Young workers.
- Expectant mothers.
- People with disabilities.
- People who are not at work all the time, such as part-timers and sub-contractors.
Make sure that you consider every person involved in the work area where the hazard is present.
Risk Assessment Step 3: Evaluating the Risks
The next step in the risk assessment is to evaluate the hazards that you have identified and decide whether they can be eliminated. If not, how can you control the risks so that harm is unlikely?
You could consider:
- Trying a less risky option.
- Preventing access to the hazard.
- Re-organising work to reduce or control exposure.
- Training staff to ensure they understand the hazards and precautions to be taken.
- Issuing personal protective equipment (PPE).
Think about the control measures that you already have in place: are these sufficient? Do you need to improve them or introduce new control measures?
Need a Course?
Our Working at Height Training helps you to comply with the Work at Height Regulations 2005 by providing employers and employees with the necessary information needed to be able to successfully deal with working at height risks and control measures.
Risk Assessment Step 4: Recording Your Findings
Workplaces that have more than 5 employees are required by law to record their risk assessment findings. However, it is recommended that you do so anyway even if your workplace has fewer.
Keeping records is crucial, as you need to be able to show that:
- A proper check was made.
- You have considered who might be affected.
- You have dealt with all the obvious significant hazards, taking into account the number of people who could be involved.
- The precautions are reasonable and the remaining risk is low.
- Staff or their representatives have been involved.
Use a fresh risk assessment sheet for each assessment you complete and for each area of the workplace. Ensure that you date the risk assessment, record details of who the assessor was, and write down action due-dates and completion dates.
Risk Assessment Step 5: Reviewing and Updating
You should check on a regular basis, such as every 6-12 months, to see whether there have been any changes in your workplace that may affect your risk assessment.
For example:
- Are there any improvements still to be made?
- Has there been employee feedback?
- Have you learnt anything from accidents and near misses?
- Has any new equipment or machinery been introduced?
- Do you have any new employees that require training?
You should also be sure to update the risk assessment on an as-and-when basis to ensure it remains up-to-date. For example, if you have a new staff member, there is an accident or you introduce some new equipment.
Updating your risk assessment regularly is crucial for keeping on top of existing and developing hazards. It ensures that you consistently maintain sufficient health and safety measures and protect the people who work on site.
Further Resources:
- Working at Height Regulations; Hierarchy of Control Measures
- How to Develop a Rescue Plan for Working at Height
- Working at Height Quiz
- Working at Height Training
Post Author
Her favourite article is How to Start a Food Business From Your Home
You may also like
HSE Articles, HSE Jobs, HSE News, & HSE Training
Working At Height Risk Assessment
Working at height risk assessment is a very important aspect of working at height if the task is to be completed successfully without accidents.
Working at height has been one of the biggest cause of fatalities and major injuries. The major risk associated with working at height is fall from height and falling objects.
Height is explain with regard to a location where if there is no precaution in place a person could fall a distance liable to cause injury. It is required by law that employers assess the risk of working at height, assess the risk and plan the work in such a way that accident is prevented.
Causes Of Fall From Height
- Use of defective equipment
- Inappropriate use of access equipment like ladder or scaffold.
- Contact with overhead electrical line
- Inexperience in the use of equipment, machinery, lifting accessories like body harness.
- Uneven surfaces
- Struck by falling equipment/material, etc.
To carry out proper working at height risk assessment, the employer must:
- Identify the risk
- Assess the risk
- Decide on the precautions required
- Record the significant findings and
- Review the assessment as necessary.
The above points are the basic elements of risk assessment.
Let us consider the elements sequentially as concerning working at height risk assessment:
Identifying the risk of working at height: As I mentioned earlier, the main risk associated with working at height is fall from height and falling object.
Hence, our main concentration in working at height risk assessment is fall from height and falling object.
Assess the risk level of falling from height: These assessment of the risk of falling from height will be dependent of the specific work at height task. Some task at height may pose either low risk level, medium risk level or high risk level.
Hence, in the assessment phase of the working at height risk assessment we can ascertain the level of risk associated with the specific working at height task.
Decide on the precautions required to prevent falling from height: Remember, the precaution will be dependent on the level of risk associated with the working at height task.
The precaution will be based on these points:
- Avoid working at height as far as reasonably practicable.
- Where working at height cannot be avoided, avoid fall from height.
- Minimize the distance and the consequence of the fall.
It is always advisable to consider general protection for falling from height first before considering individual protection. General protection include use of guard rails, scaffold, lifting platform, etc.
READ: Work At Height Hazards And Control Measures
Depending on the specific task being carried out at height, some of these precautions could be adopted:
- All workers involved in working at height should be duly trained.
- All access equipment suitable for purposes should be checked before use and maintained in good condition.
- Set reporting procedures for defective items with prompt removal or remedial action.
- Restrict high level storage
- If working at height is being carried out at different levels, debris net should be used to shield the workers on the lower level from falling object.
- Work areas should be segregated.
- Maximum level for working height should not be exceeded especially from a ladder or scaffold.
- Lone worker should not be encouraged when working at height.
- Working at height should not be undertaken in adverse weather condition like rain, wind, snow, etc.
- Fall from height accessories should be provided like body harness, retractable lanyard, helmet with chin strap, etc.
- Access to and egress from the working at height location must be made safe.
Example of the working at height risk assessment form
Here is how the risk assessment could be tabulated;
Note that based on the example highlighted above, the same should be repeated for all identified hazard exhaustively.
Record the significant findings: After the working at height risk assessment, all the findings should be duly recorded for subsequent use or review.
READ: Working At Height Safety Procedures
Review the assessment as necessary: If there were some level of failures in the working at height risk assessment, the risk assessment should be reviews accordingly for better performance.
Share this:
Related post, related posts:.
Author: Ubongeh
Copyright © 2023 HSEWatch
IMAGES
VIDEO
COMMENTS
This assessment is applicable to all UniSA workplaces where working at heights is required. However, you should carry out a risk assessment on individual
Risk assessing working at height · Identify the hazards · Decide who may be harmed, along with what that harm would look like · Evaluate the risks
What is Working At Height Risk Assessment? · Identify hazards · Evaluate the risks and determine who may be harmed · Decide on protective
This risk assessment is designed to assist workplaces in managing fall hazards in the workplace. This includes activities where people are working: off the
Working at height remains one of the biggest causes of fatalities and major injuries. Common cases include falls from ladders and through
The law requires that employers and self-employed contractors assess the risk from work at height and go on to organise and plan the work so
Working at Height Risk Assessment ; Step 1: Identifying the Hazards · Workplace observations. Obtaining feedback from employees. ; Step 2: Deciding
WORKING AT HEIGHTS. RISK ASSESSMENT FORM. JOB TITLE. DATE ASSESSED ... HAZARD. Fall from height. Fall through fragile roof. Objects falling on worker(s).
Creating a Working at Height Risk Assessment · Identifying the hazards. · Deciding who might be harmed and how. · Evaluating the risks and deciding
Working At Height Risk Assessment · All workers involved in working at height should be duly trained. · All access equipment suitable for purposes